Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

Use of Citrix Universal Printer Driver (Citrix UPD) ensures that all printers connected to a client can also be used from a virtual desktop or application session without integrating a new printer driver in the data center. Citrix UPD is the base of Citrix Universal Printer. It is an auto-created printer object that uses the Citrix UPD and is not tied to any specific printer defined on the client.

1. Connect a printer to ThinOS client.
2. From the desktop menu, click System Setup, and then click Printer.

   The Printer Setup dialog box is displayed.

   

3. Enter the name of the printer in the Printer Name box.
4. Enter any string of the Printer identification in the Printer Identification box.
5. Select the type of the printer class from the drop-down list, select the check box to enable the printer device and then click OK.
6. Start a XenDesktop or XenApp application connection.
7. Open the Devices and Printers in the desktop or application, notice the printer is mapped as UPD printer by default. You can use the HP-LaserJet-P2035 [UPD:PCL5c] to perform the print job.

   Citrix UPD configuration on server

   1. To enable the printer policy, use the following guidelines:
      1. To enable the printer policy in XenApp 6.5– Go to the DDC Server, click Start > Citrix AppCenter .

         

      2. Click Citrix Resources > XenApp > Policies > User > Settings > Printing > Client Printers and enable the Auto-create generic universal printer.

      3. Click Printing > Drivers and set the Universal print driver usage to Use universal printing only from the drop-down menu available.

         

      4. To enable the printer policy in XenApp/XenDesktop 7.5 and XenApp/XenDesktop 7.6:

         1. Go to the Citrix DDC Server,
            1. Click Citrix studio > policies and add a policy. Enable the Auto-create generic universal printer option.

            2. Set the Universal print driver usage to Use universal printing only from the drop-down menu.

         

   2. Check registry and make sure the same driver has been installed.

      1. Check the drivers in registry of the server or desktop which you want to connect. The server or desktop must have ps, pcl5, pcl4 drivers in the registry and the same driver must be installed on the server or desktop.

      2. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\UniversalPrintDrivers\. ThinOS does not support EMF and XPS.

         • NOTE: The supported drivers in the following table are one of the supported drivers for Citrix UPD used in ThinOS. One of the recommended driver is provided here as an example..
         The supported drivers are listed in the following table.

         Printer class	Printer driver
         PS	HP Color LaserJet 2800 Series PS
         PCL5	HP LaserJet 2200 Series PCL 5
         PCL4	HP LaserJet Series II

   3. If the server or desktop which you want to connect does not have these drivers, follow the steps mentioned here:

      1. For example, in XenApp A6.5+2008 R2, add PCL driver in Server. Go to Device and Printers > Select any printer > Click Printer server properties > Driver tab and then add HP LaserJet 2200 Series PCL 5 driver .

         

      2. Under HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\UniversalPrintDrivers\PCL5c\, change DriverAlias and DriverName HP LaserJet 2200 Series PCL 5 .