Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Configuring the Serial Settings

To configure the Serial settings:
  1. From the desktop menu, click System Setup, and then click Peripherals. The Peripherals dialog box is displayed.
  2. Click the Serial tab and do the following:
    1. Select Port—Click the button to select the Port. Default is COM 1
    2. Baud Rate — Select the Baud Rate from the drop-down list. Default is 9600.
    3. Parity — Click the button to select the Parity.
    4. Stop— Click the button to select the stop bits 1, 1.5, 2. Default value is 1.
    5. Size—Click the button to select the Character size 5, 6, 7, or 8 bits. Default is 8.
    6. Flow Control —Click the button to select Flow Control: Either None, XON/XOFF, CTS/RTS, or Both can be selected . Default is None
    7. Serial Touch Screen selections — Select the required touch screen from the drop-down list. Available options are ELO, MicroTouch and FastPoint .
    8. Touch Screen on — Select the required serial port ( COM port) or None from the drop-down list.
  3. Click OK to save the settings.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\