Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Check Repository Consistency

Description

This command applies to a number of objects that have underlying repository virtual disks. The command produces a report based on analysis of the data in the repository.

Syntax

check (snapGroup[snapGroupName] repositoryConsistency | snapVirtualDisk [snapVirtualDiskName] repositoryConsistency | virtualDisk
                                 [virtualDiskName] repositoryConsistency | virtualDiskCopy target [targetName] repositoryConsistency | localVirtualDisk="localVirtualDiskName")
                                 file="filePath"

Parameters

Parameter	Description
`repositoryConsistency`	Specifies that the snapshot group, snapshot virtual disk, or virtual disk (depending on which is specified by the corresponding parameter) is checked for consistency.
`snapGroup`	The alphanumeric identifier (including - and _) of the snapshot group on which to run a consistency check. Enclose the snapshot group identifier in square brackets ([ ]).
`snapVirtualDisk`	The alphanumeric identifier (including - and _) of the snapshot virtual disk on which to run a consistency check. Enclose the snapshot virtual disk identifier in square brackets ([ ]).
`virtualDisk`	The alphanumeric identifier (including - and _) of the thin virtual disk on which to run a consistency check. Enclose the virtual disk identifier in square brackets ([ ]).
`virtualDiskCopy`	Specifies that the target of a virtual disk copy relationship is checked for consistency.
`target`	Use only in conjunction with the `virtualDiskCopy` parameter to specify the alphanumeric identifier of the virtual disk that is the target of the virtual disk copy relationship. Enclose the virtual disk identifier in double quotation marks (" ").
`file`	The file path and the file name to which you want to save the report that results from the consistency check. Enclose the file name in double quotation marks (" "). For example: file="C:\Program Files\CLI\logs \repoConsistency.txt" . This parameter must appear last, after any of the optional parameters.