Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

CLI Commands

This section lists the CLI commands you can use to perform the following functions:

Identify storage arrays
Set passwords
Add storage arrays
Specify communication parameters
Enter individual script configuration commands
Specify a file containing script configuration commands

The following are general forms of the CLI commands, showing the parameters and terminals used in each command. The table below lists definitions for the parameters shown in the CLI commands.

Table 1. Command Name Conventions
Parameter	Definition
`a\|b`	pipe symbol indicating alternative ("a" or "b")
italicized-words	terminals
`[...]` (square brackets)	zero or one occurrence
`{...}` (curly brackets)	zero or more occurrences
`(a\|b\|c)`	choose only one of the alternatives
bold	terminals

SMcli 
                                 host-name-or-IP-address [
                                 host-name-or-IPaddress]
                                 [-c "
                                 command; {command2};"]
                                 [-n 
                                 storage-array-name | -w 
                                 WWID]
                                 [-o 
                                 outputfile][-p 
                                 password][-e][-S]

SMcli 
                                 host-name-or-IP-address
                                 [
                                 host-name-or-IP-address] [-f 
                                 scriptfile]
                                 [-n 
                                 storage-array-name | -w 
                                 WWID]
                                 [-o 
                                 outputfile] [-p 
                                 password] [-e] [-S]

SMcli (-n 
                                 storage-array-name | -w 
                                 WWID)
                                 [-c "
                                 command; {command2};"]
                                 [-o 
                                 outputfile][-p 
                                 password][-e][-S]

SMcli (-n 
                                 storage-array-name | -w 
                                 WWID)
                                 [-f 
                                 scriptfile]
                                 [-o 
                                 outputfile] [-p 
                                 password] [-e] [-S]

SMcli (-n 
                                 storage-array-name | -w 
                                 WWID)
                                 [-o 
                                 outputfile][-p 
                                 password][-e][-S]

SMcli -a email:
                                 email-address
                                 [
                                 host-name-or-IP-address1
                                 [
                                 host-name-or-IP-address2]]
                                 [-n 
                                 storage-array-name | -w 
                                 WWID | -h 
                                 host-name |
                                 -r (
                                 host_sa | 
                                 direct_sa)]
                                 [-I 
                                 information-to-include][-q 
                                 frequency][-S]

SMcli -x email:
                                 email-address
                                 [
                                 host-name-or-IP-address1
                                 [
                                 host-name-or-IP-address2]]
                                 [-n 
                                 storage-array-name | -w 
                                 WWID | -h 
                                 host-name |
                                 -r (
                                 host_sa | 
                                 direct_sa)] [-S]

SMcli (-a | -x) trap:
                                 community,
                                 host-name-or-IP-address [
                                 host-name-or-IP-address1
                                 [
                                 host-name-or-IP-address2]]
                                 [-n 
                                 storage-array-name | -w 
                                 WWID | -h 
                                 host-name |
                                 -r (
                                 host_sa | 
                                 direct_sa)] [-S]

SMcli -d [-w][-i][-s][-v][-S]

SMcli -m 
                                 host-name-or-IP-address -F 
                                 email-address
                                 [-g 
                                 contactInfoFile][-S]

SMcli -A [
                                 host-name-or-IP-address
                                 [
                                 host-name-or-IP-address]] [-S]

SMcli -X (-n 
                                 storage-array-name | -w 
                                 WWID |
                                 -h 
                                 host-name)

SMcli -?