Inspiron 15 3000 Service Manual

Procedure

1. Slide the power-button board under the tab on the palm-rest assembly and align the screw hole on the power-button board with the screw hole on the palm-rest assembly.
2. Replace the screw (M2x2) that secures the power-button board to the palm-rest assembly.
3. Adhere the tape that secures the power-button board to the palm-rest assembly.
4. Route the power-button board cable through the slot on the palm-rest assembly.
5. Slide the power-button board cable into its connector on the system board and close the latch to secure the cable.
6. Close the display hinges.
7. Align the screw holes on the display hinges with the screw holes on the palm-rest assembly.
8. Replace the two screws (M2.5x8) that secure the display hinges to the palm-rest assembly.