Inspiron 15 3000 Service Manual

Procedure

1. Remove the two screws (M2.5x8) that secure the display hinge to the palm-rest assembly.
2. Open the hinge to an angle of 90 degrees.
   
3. Open the latch and disconnect the power-button board cable from the system board.
4. Remove the screw (M2x2) that secures the power-button board to the palm-rest assembly.
5. Peel the tape that secures the power-button board to the palm-rest assembly.
6. Slide and remove the power-button board from the tab on the palm-rest assembly.
7. Note the power-button board cable routing and peel it off the palm-rest assembly.