Dell Precision 7530 Service Manual

Installing the system board

1. To install the system board:
   1. Align the system board into its original position on the system [1, 2].
   2. Replace the 3 (M2.0x5.0) screws to secure the system board in place [3].
      
   3. Connect the touchpad cable, LED board cable and speaker to the connectors on the system board [4, 3, 2] and affix the coin cell battery to the system [1].
   4. Place the Type-C USB bracket onto its slot on the system [5].
   5. Replace the 3 (M2.0x5.0) screws to secure the Type-C USB bracket to the system [6].
      
   6. Connect the power connector cable to the connector on the system board.
      
2. Install the:
   1. graphic card
   2. heat sink assembly
   3. palmrest
   4. SIM card
   5. M.2 SSD card
   6. WWAN card
   7. WLAN card
   8. primary memory
   9. secondary memory
   10. keyboard
   11. hard drive interposer board
   12. hard drive
   13. battery
   14. base cover
   15. SD card
3. Follow the procedure in After working inside your computer.