Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

G5 5000 Service Manual

PDF

Removing the processor fan and heat-sink assembly

Prerequisites

  1. Follow the procedure in Before working inside your computer.
    NOTE: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it.
    CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease.
  2. Remove the left-side cover.

About this task

The following images indicate the location of the processor fan and heat-sink assembly and provides a visual representation of the removal procedure.

The processor fan and heat-sink assembly on your computer may differ based on the configuration ordered.

Image: Removing the processor fan and heat-sink assembly

Steps

  1. Disconnect the processor-fan cable from the system board.
  2. In the reverse sequential order (4->3->2->1), loosen the captive screws that secure the processor fan and heat-sink assembly to the system board.
  3. Lift the processor fan and heat-sink assembly off the system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\