Fixed an issue causing the PLX switches to power off when any sled in the chassis is powered down when PCIe reassignment is
enabled.
Release 2.10
Fixed an issue causing a control panel synchronization failure during CMC firmware update.
Fixed an issue causing the PCIe adapters to potentially not link at the correct width or speed during sled reset.
Release 2.00
Fixed an issue causing shutdown of servers in redundancy alert only (RAO) mode during power supply failure.
Fixed an issue causing continuous rebooting of CMC (version <= 1.3x) with 2400W PSU.
Fixed an issue causing failure of racresetcfg, when the six RSA-4096 or four RSA-2048, and two 2048 DSA SSH public keys are
uploaded to the CMC.
Release 1.42
Fixed an issue causing unavailability of a raid licence resulting in foreign configuration during a CMC reset.
Release 1.40
Fixed an issue that caused the Server Profile page to hang when a profile is applied to multiple servers.
Release 1.33
Fixed an issue that occasionally prevented CMC from applying the desired Fan PWM after a CMC reset.
Release 1.32
Fixed the Server/Host OS Network Flap issue, which occurs occasionally on Modular platforms for a short duration during CMC
initialization.
Fixed the Server/Host OS Network port off issue, which occurs after CMC reset on Full-height Modular platforms when the second
network daughter card is not installed.
Fixed an issue causing the CMC Web GUI to become unresponsive while using Active Directory login with WinRM.
Fixed an issue causing memory-full condition when the internal log files are overgrown.
Release 1.30
Fixed an issue with the “getmacaddress –m <server> –t iscsi” command displaying non-iSCSI MAC addresses after using the iSCSI
filter.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\