Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Setting the Time for the Software Clock

You can change the order of the month and day parameters to enter the time and date as time day month year . You cannot delete the software clock.

The software clock runs only when the software is up. The clock restarts, based on the hardware clock, when the switch reboots.

To set the software clock, use the following command.

Set the system software clock to the current time and date. EXEC Privilege mode clock set time month day year
  • time : Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format; for example, 17:15:00 is 5:15 pm.
  • month : Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year.
  • day : Enter the number of the day. The range is from 1 to 31. You can enter the name of a month to change the order of the display to time day month year.
  • year : Enter a four-digit number as the year. The range is from 1993 to 2035.

Example of the clock set Command 

Dell#clock set 12:11:00 21 may 2012
                                 Dell#

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\