Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FC430 Owner's Manual

PDF

Removing the PCIe mezzanine card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
  1. Follow the safety guidelines listed in the Safety instructions section.

  2. Follow the procedure listed in the Before working inside your system section.

  3. If connected, disconnect all external storage devices.

  4. If connected, disconnect all USB devices.

  5. Remove the SSD cage.

  6. Keep the Phillips #2 screwdriver ready.

Steps

  1. To remove the SSD cage base cover:
    1. Place the SSD cage upside down with the USB ports to your right.
    2. Remove the screws securing the SSD cage base cover to the SSD cage.
    3. Slide the SSD cage base cover back and lift the cover away from the SSD cage.
    Figure 1. Removal of the SSD cage base cover
    This figure shows the removing and installation of the SSD cage base cover
    1. SSD cage
    2. screw (2)
    3. SSD cage base cover
  2. To remove the PCIe mezzanine card:
    1. Remove the screws securing the PCIe mezzanine card to the SSD cage.
    2. Slide the mezzanine card back and lift the card away from the SSD cage.
    3. Remove the PCIe mezzanine card bridge and keep it aside for future use.
    CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card only by its edges.
    Figure 2. Removing a PCIe mezzanine card
    This figure shows the removing the PCIe mezzanine card.
    1. screw hole on SSD cage (2)
    2. external storage connector (2)
    3. PCIe mezzanine bridge card
    4. Screw (2)
    5. PCIe mezzanine card
    6. SSD cage

Next steps

  1. Install the PCIe mezzanine card.

  2. Install the SSD cage.

  3. If applicable, reconnect the disconnected storage devices.

  4. If applicable, reconnect the disconnected USB devices.

  5. Follow the procedure listed in the After working inside your system section.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"