- Notes, cautions, and warnings
- Before working inside your computer
- After working inside your computer
- Technical overview
- Removing the side panel
- Replacing the side panel
- Removing the wireless card
- Replacing the wireless card
- Replacing the optical drive
- Removing the optical drive
- Removing the memory module
- Replacing the memory module
- Removing the hard drive
- Replacing the hard drive
- Removing the graphics card
- Replacing the graphics card
- Removing the solid-state drive
- Replacing the solid-state drive
- BIOS setup program
- Flashing the BIOS
- Getting help and contacting Alienware
Alienware X51 Service Manual
Boot Options
Following are the devices that your computer can boot from:
Floppy — The computer attempts to boot from the floppy disk drive. If no operating system is on the drive, the computer generates an error message.
Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error message.
CD/DVD/CD-RW Drive — The computer attempts to boot from the optical drive. If no disc is in the drive, or if the disc is not bootable, the computer generates an error message.
USB Storage Device — Insert the memory device
into a USB connector and restart the computer. When
F12
Boot Options
appear in the lower-right corner of the screen,
press F12. The BIOS detects the device and adds the USB flash option
to the boot menu.
Network — The computer attempts to boot from the network. If no operating system is found on the network, the computer generates an error message.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"