Dell Command | Monitor Version 9.1 Reference Guide

A string describing the additional power management state of the element, used when the PowerState is set to the value 1, Other.

A string describing the additional power management state of the element, used when the RequestedPowerState is set to the value 1, Other.

The time when the element will be powered on again, used when the RequestedPowerState has the value 2, On, 5, Power Cycle (Off - Soft) or 6, Power Cycle (Off - Hard) .

The current power state of the associated Managed System Element.

Possible values are:

• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -Deep
• 5 = Power Cycle (Off - Soft)
• 6 = Off - Hard
• 7 = Hibernate (Off - Soft)
• 8 = Off - Soft
• 9 = Power Cycle (Off-Hard)
• 10 = Master Bus Reset
• 11 = Diagnostic Interrupt (NMI)
• 12 = Off - Soft Graceful
• 13 = Off - Hard Graceful
• 14 = Master Bus Reset Graceful
• 15 = Power Cycle (Off - Soft Graceful)
• 16 = Power Cycle (Off - Hard Graceful)
• .. = DMTF Reserved
• 0x7FFF..0xFFFF = Vendor Specific

The desired or the last requested power state of the associated Managed System Element, irrespective of the mechanism through which the request was made. If the requested power state is unknown, then the property has the value of 0 Unknown. If the property has no meaning or is not supported, then the property has the value 12 Not Applicable.

Possible values are:

• 0 = Unknown
• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -_Deep
• 5 = Power Cycle (Off - Soft)
• 6 = Off - Hard
• 7 = Hibernate (Off - Soft)
• 8 = Off - Soft
• 9 = Power Cycle (Off-Hard)
• 10 = Master Bus Reset
• 11 = Diagnostic Interrupt (NMI)
• 12 = Not Applicable
• 13 = Off - Soft Graceful
• 14 = Off - Hard Graceful
• 15 = Master Bus Reset Graceful
• 16 = Power Cycle (Off - Soft Graceful)
• 17 = Power Cycle (Off - Hard Graceful)
• .. = DMTF Reserved
• 0x7FFF..0xFFFF = Vendor Specific

The Service that is available.

The ManagedElement that can use the Service.