Active System Manager Release 8.2 User’s Guide

PDF

Cluster component settings

Table 1. Cluster component settings
Field Name	Description
Cluster Settings (Target vCenter)
Target Virtual Machine Manager	Select virtual machine manager from the Target Virtual Machine Manager drop-down menu.
Data Center Name	Select data center name from Data Center Name drop-down menu.
Cluster Name	Select new cluster name from Cluster Name drop-down menu.
New cluster name	Select new cluster name from New Cluster Name drop-down menu.
Cluster HA Enabled	Enables or disables highly available cluster. You can either select or clear the check box. By default, it is unchecked.
Cluster DRS Enabled	Enables or disables distributed resource scheduler (DRS). You can either select or clear the check box. By default, it is unchecked.
Switch Type	Allows you to configure the virtual switches as distributed or standard for the host network. If enabled, the switches are configured as distributed switches. NOTE: This option is applicable only for VMware clusters. NOTE: Ensure that version of the distributed switches that are configured is based on the lowest available host version in a cluster to ensure compatibility with all the clusters in the host.
Cluster Settings (Target Hyper-V)
Hypervisor Management Software	Specifies the target SCVMM.
Host Group	Specifies the host group that you want to target.
New host group name	Enables to specify a new host group. Enter the host group in the format: All hosts\ <group name>
Cluster Name	Specifies the name of the cluster.
New cluster name	Enables you to specify a new cluster.
Cluster IP Address	Specifies the cluster IP address.