Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge R730 Owner's Manual

Troubleshooting power supply unit problems

Steps

  1. Ensure that no loose connections exist.
    For example, loose power cables.
  2. Ensure that the power supply handle LED indicates that the power supply is working properly.
  3. If you have recently upgraded your system, ensure that the power supply unit has enough power to support the new system.
  4. If you have a redundant power supply configuration, ensure that both the power supply units are of the same type and wattage.
    If the LED You may have to upgrade to a higher wattage power supply unit.
  5. Ensure that you use only power supply units with the Extended Power Performance (EPP) label on the back.
  6. Reseat the power supply unit.
    NOTE: After installing a power supply unit, allow several seconds for the system to recognize the power supply unit and determine if it is working properly.

    If the problem persists, see the Getting help section.


Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"