- Notes, cautions, and warnings
- Introduction
- Advantages of using Lifecycle Controller
- Benefits of using iDRAC with Lifecycle Controller
- Key features
- New in this release
- Advantages of using Lifecycle Controller Remote Services
- Licensable features in Lifecycle Controller
- About iDRAC RESTful API with Redfish and Web Service APIs
- About Lifecycle Controller API
- About one-to-many management achieved
- Other information that you may need
- Accessing documents from the Dell EMC support site
- Contacting Dell
- Remote Services Features
- Deployment and configuration
- Monitor
- Maintain
- Job management
- Getting started with API collateral and links
- Integrating the Lifecycle Controller API
- Social media reference
- Terms and definitions
Bienvenue
Bienvenue dans l’univers Dell
Mon compte
- Passer des commandes rapidement et facilement
- Afficher les commandes et suivre l’état de votre expédition
- Créez et accédez à une liste de vos produits
- Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Dell Lifecycle Controller Remote Services v2.60.60.60 Quick Start Guide
Exceptions while importing server profile
On certain Dell devices, successful application of a server configuration profile requires two imports. The first import of the profile enables hidden devices that are then configured with a second import.
Two imports
are required while performing following actions:
- Enabling RAID mode on storage controllers — PERC S110
and PERC S130 require two imports – one to set the embedded SATA controller
to RAID mode and the second to configure the RAID controller for operations
such as creating a virtual disk.
Example:
If the EmbSata BIOS attribute on the import system is not set to RAIDMode, then the first import must contain the following:<Component FQDD="BIOS.Setup.1-1"> <Attribute Name="EmbSata">RaidMode</Attribute> </Component>
The second server import is to apply the configuration on the PERC controller:<Component FQDD="RAID.Embedded.1-1"> <Attribute Name="RAIDresetConfig">False</Attribute> <Attribute Name="RAIDforeignConfig">Ignore</Attribute> <Component FQDD="Disk.Virtual.262145:RAID.Embedded.1-1"> <Attribute Name="RAIDaction">Create</Attribute> <Attribute Name="Name">Virtual Disk 1</Attribute> <Attribute Name="Size">0</Attribute> <Attribute Name="StripeSize">128</Attribute> <Attribute Name="SpanDepth">1</Attribute> <Attribute Name="SpanLength">2</Attribute> <Attribute Name="RAIDTypes">RAID 0</Attribute> <Attribute Name="IncludedPhysicalDiskID">Disk.Direct.0-0:RAID.Embedded.1-1</Attribute> <Attribute Name="IncludedPhysicalDiskID">Disk.Direct.1-1:RAID.Embedded.1-1</Attribute> </Component> <Component FQDD="Disk.Direct.0-0:RAID.Embedded.1-1"> <Attribute Name="RAIDPDState">Ready</Attribute> </Component> <Component FQDD="Disk.Direct.1-1:RAID.Embedded.1-1"> <Component FQDD="Disk.Direct.1-1:RAID.Embedded.1-1"> <Attribute Name="RAIDPDState">Ready</Attribute> </Component> </Component>
- Enabling PCI slots — PCI slots in the system that
are disabled in the BIOS require two imports – one to enable the slot
and another to configure the card in the slot.
Example
If the Slot1 BIOS attribute on the import system is disabled, the first import must contain the following:<Component FQDD="BIOS.Setup.1-1"> <Attribute Name="Slot1>Enabled</Attribute> </Component>
A second import is required to configure the device in slot 1.
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\