Firmware upgrade using Wyse Management Suite version 1.1
Ensure that you have created a custom group and assigned the ThinOS devices to that group in Wyse Management Suite—see Wyse Management Suite v1.1 Administrator's Guide.
Ensure that your ThinOS clients are registered to Wyse Management Suite. See, Configuring the WDA settings .
To upgrade the ThinOS firmware using Wyse Management Suite:
Sign in to the Dell Digital Locker .
Download the latest ThinOS firmware and ThinOS packages that corresponds to your thin client model. Log in to Wyse Management Suite using valid credentials. On the Apps & Data page, in the OS Image Repository section, click ThinOS . Click Add Firmware File . The Add File dialog box is displayed.
Browse and select the downloaded firmware file. Enter an appropriate description. Click Upload . The ThinOS firmware file is uploaded, and the firmware file is listed on the Apps & Data - ThinOS OS Image Repository page.
Select the check box that corresponds to your ThinOS firmware file. On the Groups & Configs page, select a custom group, and click . The Select ThinOS Configuration Mode screen is displayed.
Click Advanced Configuration . In the Device Configuration pane, click Firmware Upgrade , and then click Configure this item . From the Platform type drop-down list, select your thin client model. From the Firmware to auto deploy drop-down list, select the firmware file that corresponds to your thin client model. Click Save & Publish . The thin client restarts, and the firmware version is upgraded.