Your system includes up to four half-height server
modules, two full-height server modules, or a mix of the server module
types. The server modules are specifically configured for the PowerEdge
VRTX enclosure, and can be identified by a label marked PCIe on the server module.Figure 1. Identifying
a server module configured for the PowerEdge VRTX enclosure
PCIe label on the server module
server module
PowerEdge VRTX enclosure
If you install server modules that are not configured
for the enclosure, an error message is displayed.
The enclosure supports power supply units, hard drives,
Chassis Management Controllers (CMC), blower modules, and an I/O module.
These are shared resources for the server modules.
NOTE:To ensure proper
operation and cooling, all bays in the enclosure must be populated
at all times with either a server module or with a blank. Similarly,
all empty hard drive slots in the enclosure must be installed with
hard drive blanks.
Non sono disponibili i dati per l'argomento
Fornisci una valutazione (1-5 stelle).
Fornisci una valutazione (1-5 stelle).
Fornisci una valutazione (1-5 stelle).
Indica se l'articolo è stato utile o meno.
I commenti non possono contenere i seguenti caratteri speciali: <>() \
