CAUTION:Many repairs may only
be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation,
or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that are
shipped with your product.
Steps
Align the expansion card riser with the PCIe cage and slide
the riser into the cage, until properly seated.
When properly aligned, the chassis intrusion switch on
the riser aligns with the slot on the PCIe cage.
Attach the screws to secure the expansion card to the PCIe
cage.
Reconnect the power cable.
Reinstall the full-height expansion card divider unit.
If applicable, reinstall the expansion card(s) into the
expansion card riser.
Reinstall the PCIe cage.
Reinstall the cooling fan assembly.
Reinstall the cooling shroud.
Close the PCIe cage door.
Close the system.
If applicable, place the system upright on a flat, stable
surface and rotate the system feet outward.
Reconnect the enclosure to its electrical outlet and turn the enclosure on, including any attached peripherals.
Turn on the server modules using the operating system commands
or the CMC.
If applicable, install the front bezel.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\