Dell Lifecycle Controller Integration Version 3.3 for Microsoft System Center Configuration Manager User's Guide

Creating a NIC or CNA profile

To create a NIC/CNA profile:

On the System Viewer utility, click Network Adapter Configuration.
The options to create a new profile, edit an existing profile, or scan a collection to identify the adapters are displayed.
Select Create new profile and click Next.
The Network Adapter Configuration screen is displayed.
Click Add to add an adapter.
In the Add Adapter dialog box, perform the following:
- Select the Adapter type from the drop-down list.
- Select the adapter location and specify the slot number.
- Click OK.
  The adapter is now added to the Network Adapter Configuration screen.
If you want to remove any of the adapters from the profile, select the adapter and click Remove.
Select the adapter and click Configure to configure it. For more information on configuring the adapter, see Configuring Adapters.
After you complete configuring the adapters, click Save as profile to save the NIC profile.
If you have not configured any of the adapters in the profile, the following message is displayed:
```
No Adapter is configured. Please configure before saving.
```
Click OK and configure some of the adapters before saving the profile.
If you have configured some of the adapters and not all of them, the following message is displayed:
```
You have not configured all adapters and settings. Are you sure you want to save the profile?
```
Click OK to continue saving the profile, or click Cancel to configure all the adapters.