Dell Wyse ThinOS Version 8.6 and ThinOS Lite 2.6 Operating System Release Notes

INI parameters

The following table provides the list of newly added INI parameter in this release:

NOTE: Every INI parameter is associated with a parent INI parameter. Use these INI parameters along with the corresponding parent INI parameters.

Table 1. INI parametersINI parameters
INI parameters	Description*
[Week={Current, Other, 0, 1, 2, 3, 4}]	Enables you to specify the minimum weeks required to reboot the client after configuring an INI parameter.
[disabledKeys={PrtScn;SysRq}]	Enables you to disable keys on the keyboard.
[UpgradeOrder={bios, wtos}]	Enables you to specify the upgrade order between BIOS and firmware.
[Default={camera device name}]	Enables you to set the default camera device settings.
[CAGUserAsUPN={yes, no}]	Enables you to send user details to server in the format similar to an email address (username@fqdn).
[CAGExternal={yes, no}]	Enables you to log in to csg with an external network directly without verifying beacons.
[enableReminder={yes, no}]	Enables you to postpone the reboot triggered by the Wyse Management Suite agent.
SysinfoOntop=[yes, no]	Enables the System Information window to be displayed at the top in the Z-Order and overlaps on the nonmode switched full screen session window.
[DisableSFInit={yes, no}]	Enables you to disable the StoreFront initialize process after the device reboot.
[Host={broker_url}] [AutoConnectList={*\|host1;host2;host3...}]	The Host option enables you to specify the broker server IP address or FQDN. The AutoConnectList option specifies the VDI desktops or applications launched automatically when you use VDI to sign in to the session.
MultiHead=[yes, no] [ManualOverride={yes, no}] [Mainscreen={1,2,3,4,5,6}] [Resolution={ddc, width X height}] [Rotate={left, right}]	The MultiHead option enables you to set the span mode or mirror mode for multiple monitors on Wyse 5070 thin client. The ManualOverride option enables you to manually set the monitor layout. The Mainscreen option enables you to set the required display as a main screen. The Resolution and Rotate options works when the display is set to mirror mode and MultiHead=no.
Screen=[1,2,3,4,5,6] [align={screen id, top\|center\|bottom\|left\|right, top\|center\|bottom\|left\|right}]	The Screen option enables you to select the screen which you want to set as default. The align option enables you to set the screen alignment on Wyse 5070 thin client.
Connect=[ICA, RDP, PCoIP] [OnScreen={1-6}]	The PCoIP value is added to the Connect parameter. The OnScreen option enables you to specify which display must be in full screen in an RDP session.
[EnableHardwareCursor={yes, no}]	Enables you to control the hardware cursor in the Blast session.
ManualOverride=[no, yes] [Components={None, display, keyboard, mouse, timezone, network, audio, printer, All}]	The ManualOverride option enables you to retain your personalized settings. The Components option enables you to specify the component for which personalized settings are required.
[DesktopScaleFactor={100–500}]	Enables you to set the percentage of desktop scaling factor for RDP connection.
[MaxConnect=max]	Enables you to set the maximum number of session connections that you can specify in both wnos.ini and username.ini.

*For detailed description and default values, see the Dell Wyse ThinOS Version 8.6 INI Reference Guide at www.dell.com/support.

Welkom

Welkom bij Dell

Dell Wyse ThinOS Version 8.6 and ThinOS Lite 2.6 Operating System Release Notes

INI parameters

Beoordeel deze inhoud