Dell Latitude 5310 2-in-1 Setup and specifications guide

Security

Table 1. SecurityThe table describes the security configuration information.
Option	Description
Admin Password	Allows you to set, change, or delete the administrator (admin) password. The entries to set the password are: Enter the old password: Enter the new password: Confirm new password: Click OK once you set the password. NOTE: For the first time login, "Enter the old password:" field is marked to "Not set". Set the password for the first time and later you can change or delete the password.
System Password	Allows you to set, change, or delete the System password. The entries to set the password are: Enter the old password: Enter the new password: Confirm new password: Click OK once you set the password. NOTE: For the first time login, "Enter the old password:" field is marked to "Not set". Set the password for the first time and later you can change or delete the password.
Strong Password	Allows you to enforce the option to always set the strong password. Enable Strong Password This option is not set by default.
Password Configuration	You can define the length of your password. Min = 4, Max = 32
Password Bypass	Allows you to bypass the System password and the Internal HDD password, when it is set, during a system restart. Click one of the options: Disabled—Default Reboot bypass
Password Change	Allows you to change the System password when the administrator password is set. Allow Non-Admin Password Changes This option is set by default.
Non-Admin Setup Changes	Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set. If disabled, the setup options are locked by the admin password. Allow Wireless Switch Changes This option is not set by default.
UEFI Capsule Firmware Updates	Allows you to update the system BIOS via UEFI capsule update packages. Enable UEFI Capsule Firmware Updates This option is set by default.
TPM 2.0 Security	Allows you to enable or disable the Trusted Platform Module (TPM) during POST. The options are: TPM On—Default Clear PPI Bypass for Enable Command—Default PPI Bypass for Disbale Command PPI Bypass for Clear Command Attestation Enable—Default Key Storage Enable—Default SHA-256—Default
Absolute®	This field lets you Enable, Disable, or Permanently Disable the BIOS module interface of the optional Absolute Persistence Module service from Absolute® Software.
OROM Keyboard Access	This option determines whether users are able to enter Option ROM Configuration screens via hotkey during boot. Specifically this settings is capable of preventing access to Intel® RAID (Ctrl+I) or Intel® Management Engine BIOS Extension (Ctrl+P/F12). Options are: Enable One Time Enable Disable
Admin Setup Lockout	Allows you to prevent users from entering Setup when an administrator password is set. Enable Admin Setup Lockout This option is not set by default.
Master Password Lockout	Allows you to disable master password support. Enable Master Password Lockout This option is not set by default. NOTE: Hard Disk password should be cleared before the settings can be changed.
SMM Security Mitigation	Allows you to enable or disable additional UEFI SMM Security Mitigation protection. SMM Security Mitigation This option is not set by default.