Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

SYSCFG Options For State Configuration

The following table lists all valid options and arguments along with a description of the expected behavior of each option.

NOTE: Some of the following options or arguments are not available on all systems.

Table 1. SYSCFG Options and Arguments for State Configuration
Option	Valid Arguments	Description
`-b or --byte`	`< string>`	Specifies a value to write to state data. The format of the argument must be in decimal format unless the -x option is given. If the -x option is given, the value is interpreted as hexadecimal format. The value can optionally contain 0x. The decimal range is 0–255, and the hexadecimal range is 0x00–0xFF. Example: A:>syscfg -b 1 The state byte has been set to 1. A:>syscfg -b 2 -x The state byte has been set to 0x02.
`-r or --read*` NOTE: The asterisk is not part of the command syntax.	NA	Reads the value of state data. When used with the -x option, the value is reported in hexadecimal format (0xNN). Example: A:>sysfg -r -x The state byte has been set to 0x02. A:>syscfg -r The state byte has been set to 2.
`-x or --hex`	None	Specifies that a value should be in hexadecimal format. Example: A:>sysfg -r -x The state byte has been set to 0x01. A:>sysfg -x -b 0x02 The state byte has been set to 0x02.