- Notes, cautions, and warnings
- Working on your computer
- Disassembly and reassembly
- Technology and components
- BIOS Overview
- System setup options
- Navigation keys
- System Setup overview
- Accessing System Setup
- General screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Wireless screen options
- Memory specifications
- System logs screen options
- SupportAssist system resolution
- Updating the BIOS in Windows
- System and setup password
- Technical specifications
- System specifications
- Processor specifications
- Memory specifications
- Storage specifications
- Audio specifications
- Video specifications
- Camera specifications
- Communication specifications
- Port and connector specifications
- Keyboard specifications
- Touchpad specifications
- Battery specifications
- AC adapter specifications
- Physical specifications
- Environmental specifications
- Troubleshooting
- Contacting Dell
Latitude 3180 Owner's Manual
System Configuration screen options
- Option
- Description
- Drives
- Allows you to configure the SATA drives on board.
- SATA-0 enabled by default
- eMMC enabled by default
- USB Configuration
This is an optional feature.
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any type of USB Mass Storage Devices—HDD, memory key, floppy.If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
- Enable Boot Support—enabled by default
- Enable External USB Port—enabled by default
NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.- USB PowerShare
- This field configures the USB PowerShare feature behavior. This option allows you to charge external devices using the stored system battery power through the USB PowerShare port. This option is disabled by default
- Audio
- This field enables or disables the integrated audio
controller. By default, the Enable Audio option is selected.
The options are:
- Enable Microphone—by default enable
- Enable Internal Speaker—(default enable)
- Debug Memory Frequency Configuration
- Allows you to enable or disable the following devices:
- Memory Frequency 1866
- Memory Frequency 1600 (default enable)
- Miscellaneous Devices
- Allows you to enable or disable the following devices:
- Secure Digital (SD) card—enabled
- Secure Digital (SD) card read-only-mode
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\