Ana içeriğe atla
  • Hızla ve kolayca sipariş verin
  • Siparişleri görüntüleyin ve kargonuzun durumunu izleyin
  • Ürünlerinizin listesini oluşturun ve listeye erişin
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OptiPlex 3060 Micro Service Manual

Removing the M.2 PCIe SSD

About this task

NOTE:The instructions are applicable to M.2 SATA SSD also.

Steps

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. Side cover
    2. 2.5 inch hard drive assembly
  3. To remove the M.2 PCIe SSD:
    1. Remove the single (M2X3.5) screw that secures the M.2 PCIe SSD to the system board [1].
    2. Lift and pull out the PCIe SSD from its connector on the system board [2].
      Displays the removal of SSD

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\