NetWorker Module for Databases and Applications

Tento článek dokumentuje řešení selhání instalace NMC při spouštění procesu gstdbinit.

Tento dokument popisuje minimální, doporučené a nejnovější verze kódu k produktům podnikové kategorie a infrastruktury datových center Dell Technologies. Pečlivě vyhodnocujeme a monitorujeme data o nasazení kódu, aby vydání produktů splňovala naše přísná očekávání a zákazníkům poskytla spolehlivé produkty a řešení.

Zálohy NetWorker Oracle se nezdaří s chybou ORA-01017: invalid username/password; Přihlášení odepřeno

These are the general steps to replace the default NetWorker self-signed certificate with a Certificate Authority (CA)-signed certificate for the "AUTHC" and "NWUI" services. This KB applies when the NetWorker server and NetWorker Web User Interface (NWUI) server are installed on Windows operating systems.

These are the general steps to replace the default NetWorker self-signed certificate with a Certificate Authority (CA)-signed certificate for the "AUTHC" and NetWorker Web UI (NWUI) services.

Rapid7 scan identified security vulnerabilities on various ports of NetWorker.

This article provides instructions for enabling HTTP Strict Transport Security (HSTS) on NetWorker web-based applications.

A Security Vulnerability Scanner detects the "/nsr/authc/webapps/ebr-server.war" server file may contain the Apache Log4j Security Vulnerability in a NetWorker 19.6.0 Datazone.

Řešení RecoverPoint for Virtual Machines (VM) 6.0.3.1 a novější jsou způsobilá pro zálohovací řešení VMware vStorage API for Data Protection (VADP). Někdy se ale u chráněných virtuálních počítačů mohou během operací zálohování objevit chyby konsolidace snapshotů nebo restartování virtuálního počítače.

Oracle schedule backup fails with error. The NMDA error message has been lost. Set NSR_DEBUG_LEVEL to a value greater than 0 and run NMDA.

The NetWorker client service fails to start on a Linux system.

Dell EMC NetWorker vProxy based backups using the Hotadd transport mode show one or more VMs failing with a VDDK 13 error about access rights to the VMDK files.

NMMedi backups started failing for some segments at random with the error. The backup has failed because save set id is marked as failed or suspect or is missing in the media database. The log also shows "Unable to verify caller privileges: Timed out."

vProxy recover inside Cyber Recovery vault fails with error "Unable to find a usable device for recovery of saveset."

After upgrade to 19.10.0.5, on Windows Server, Virtual Machine (VM) recovery fails with error "Could not parse the date time value"

NetWorker Module for Meditech must support: RecoverPoint for Virtual Machines 6.0.3.1 in vCenter 8.0U3 or higher environment

NetWorker Module for Databases and Applications (NMDA) IBM DB2 snapshot backups are unresponsive.

How to Rename a NetWorker Client and Complete Required Post‑Rename Tasks.

DB2 schedule backup failing with Vendor error: rc = 25 returned from function sqluvput due DD to timeout

Domino LOTUS backups performed through the NetWorker Module for Databases and Applications (NMDA) fail to initialize a domino session with error code 272.

NetWorker Module for Databases and Applications (NMDA) backup of DB2 Database including log files was previously successful, then started failing constantly with no changes that are made to configuration.

NMSAP for SAP Hana is unable to establish direct save session with Data Domain device.

Error: nsrmedisv(6448): Error: SYMM_SNAP_TECH is not found in application information.

NetWorker Module for Databases and Applications (NMDA) Oracle backups are slow over InfiniBand network.

NMDA: Oracle backup fails with ORA-00600: internal error code, arguments: [ipc_recreate_que_2], [1], [0]

SAP Backups fail due to improper client definition

NetWorker VMware Protection (NVP) vProxy appliance registration fails with a general HTTP 500 error. The vProxy and NetWorker server can communicate successfully over port 9090. SSL connection testing shows that the communication fails to establish a TLS handshake due to the usage of TLSv1.0. The error seen is SSL23_GET_SERVER_HELLO:tlsv1 alert protocol version.

Jak vymazat soubory protokolu Lotus Transaction ze serveru Domino.

Jak nainstalovat a nakonfigurovat NMDA pro DB2 nakonfigurovaný jako DPF.

Obnovení databáze Oracle selže, když se správce pokusí o obnovení pomocí konzole NetWorker Management Console (NMC).