VxRail Software

Tento dokument popisuje minimální, doporučené a nejnovější verze kódu k produktům podnikové kategorie a infrastruktury datových center Dell Technologies. Společnost Dell Technologies pečlivě vyhodnocuje a monitoruje data o nasazení kódu, aby vydání produktů splňovala naše přísná očekávání a zákazníkům poskytla spolehlivé produkty a řešení.

Tento článek představuje nástroj VxRail VxVerify a popisuje, jak jej spustit v prostředí VxRail.

Event code: VXR500VLT404 This event code indicates "The <sensor name> sensor detected an error with a value of <voltage> Volts."

Jak nahradit certifikát SSL hostitele ESXi vlastním certifikátem bez restartování hostitele ESXi.

After vSphere Secure Sockets Layer (SSL) certificates are replaced, some host-related functionalities become intermittently unavailable.

Procedure to add a custom signed certificate on VxRail Manager 7.x and 8.x.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Event code: VXR508FAN0014 This event code indicates "<fan name> RPM is greater than the upper warning threshold."

Event code: VXR508CBL0008 This event code indicates "One or more cables are missing from <controller name>."

Event code: VXR508AMP401 This event code indicates "Unable to read the < sensor name > sensor value."

VxVerify on VxRail Manager can attempt to correct iDRAC and iSM fault by restarting iDRAC and related VxRail node services.

Event code: VXR508CTL113 This event code indicates "The controller <controller name> is operating in Degraded Fault Tolerant Mode because of a mismatch between the encryption key setting of the controller and its peer controller."

Event code: VXR508BAT0031 This event code indicates "The system board battery status is unknown."

Event code: VXR508CTL202 This event code indicates "Unable to open the firmware and driver configuration file <file name> of <controller name>."

Event code: VXR508CTL208 This event code indicates "Unable to authenticate the entered passphrase for the <controller name>."

Event code: VXR508ENC13 This event code indicates "Unsupported configuration detected on <Enclosure Name>. <EMM0 1> <EMM1 2>"

Event code: VXR508CTL200 This event code indicates "The current firmware version <version number> is older than the required version <version number> for <controller name>."

Event code: VXR508FAN0018 This event code indicates "Enhanced Cooling Mode is not supported for fan <fan number>."

Event code: VXR500TMP504 This event code indicates "The <sensor name> sensor has detected an error with a value of <temperature> degrees Celsius."

A lock on virtual machine (VM) .vmdk file is held by NetWorker vProxy even if the backup is not running, maybe due to a HA/network event.

Tento článek popisuje reakci technického oddělení VxRail na problém zabezpečení vzdáleného spouštění kódu Apache Log4j známý jako Log4Shell. To je popsáno v chybách CVE-2021-44228, CVE-2021-45046 a CVE-2021-4104 (článek Dell DSN-2021-007, článek VMware VMSA-2021-0028)

This checks the Domain name system (DNS) entries in the settings database against the "resolv.conf" file, to ensure the entries match.

Databáze HCL (Hardware Compatibility List) sítě vSAN není aktuální.

Gathering the stats.db files helps with diagnosis of VxRail performance cases and should be uploaded for offline analysis.

Kontrola stavu vc_pw_char ověří, zda heslo odpovídá pravidlům VMware, pokud se přihlašovací údaje nemohou přihlásit do nástroje vCenter.

Toto je článek znalostní databáze, který pojednává o upgradu externího zařízení vCenter před upgradem VxRail Cluster.

During a VxRail LCM upgrade, the VxRail Manager UI may remain stuck in the “Upgrading” state for more than an hour with no visible progress and no new task updates. This occurs when resource issues prevent the VxRail Manager (vmware-marvin) service from fully initializing the LCM workflow, even though the upgrade completes in the background. Restarting the vmware-marvin service on the VxRail Manager VM allows the workflow to resume and the UI to reflect continued progress.

VCF has disconnected account from ESXi node account for root and built-in service account.

This enhancement makes it easier for both connected and non‑connected customers to access and copy important part information—such as part numbers and slot details—directly from event details in the Physical View UI. For connected customers, this information is automatically sent to Dell Support to help expedite issue resolution. Non‑connected customers can copy these details into the Dell Virtual Assistant to streamline issue resolution and support requests.