Connectrix DS-8820B

Tento dokument popisuje minimální, doporučené a nejnovější verze kódu k produktům podnikové kategorie a infrastruktury datových center Dell Technologies. Společnost Dell Technologies pečlivě vyhodnocuje a monitoruje data o nasazení kódu, aby vydání produktů splňovala naše přísná očekávání a zákazníkům poskytla spolehlivé produkty a řešení.

Tento článek znalostní databáze obsahuje postup výměny člena zóny.

Nelze importovat zásadu MAPS pomocí BNA v přepínači SAN.

Jak obnovit slot ze zprávy EM-1045, CHASSIS, WARNING, Slot XX is being powered OFF (not enough power)?

Procedure to customize the chassis name.

After upgrading to Fabric OS (FOS) 9.1.1c, unable to run inline commands from UNIX or Linux server to the switch with the "fosexec" commands.

A slow blinking amber light showing internally from the switch model DS6620B-V2, not from the switch panel, is confirmed by Brocade to be the LED from the eUSB card (on the motherboard).

Learn how to use PuTTY for SSH key-based authentication. Step-by-step instructions to create SSH keys, add SSH key to PuTTY, and connect with SSH key securely on Connectrix B-Series.

This KB provides steps to rename a zone object. You can use these steps for all zone object types, including cfgs, zones, and aliases.

The seccermgmt cert shows error "Is an unknown x509 format."

Connectrix B-Series FOS compatibility check with SMI-S Agents

Výstup configupload se automaticky generuje s příponou přepínače, nikoli s názvem souboru poskytnutým uživatelem.

When the active ports have exhausted the current POD license pool, additional ports will not be assigned a license. In such cases, manually move licenses from unused ports by releasing the POD assignment to a newly used port and reserve it. FOS 9.x and above

This issue is seen while the backed-up switch configuration has been loaded to the switch using the configdownload command.

AES256-SHA256 (0x3d) and AES128-SHA256 (0x3c) is blocked for TLS.

Fabric OS 9.1.0 introduces the Fibre Channel Link Aggregation (FC-LAG) feature to provide FC-LAG capability between Brocade switches and Cisco UCS FIs that are configured in end-host mode.

Switch policy status is critical due to WWN_DOWN.

OpenSSH public key authentication provides password-less logins, known as SSH authentication that uses public and private key pairs for incoming authentication. Any admin user can perform incoming Open SSH public key authentication.

DCX8510-8B rebooted with error "Processor rebooted - Reset"

wwpn of the connected device is not displayed correctly showing 0s.

How to disable the ISLs if no longer required

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

Na serverech v rámci domény UCS nelze přidat jednotky LUN nad rámec aktuálních 256 jednotek.

This KB article is to explain on how to add Gateway IP while using IPV6 using CLI and WebTools.

Around December 2022 the Ports On Demand (POD) kit license activation process changed.

Historical Port Stats collection doesn't work for some switches and SNMP data is not been received in SANnav

Self-signed syslog switch certificates are supported in Fabric OS. as long as the certificate is created on another system (read: server) which has OpenSSL support. Or if a customer wants to have a secure syslog, it also can be a CA signed certificate.

There is a limited number of DS-6620B, switch type 162, unable to add additional licenses. (including Pod kit)

This article explains the steps involved cloning a default policy in MAPS configuration and activating the new cloned maps policy.

Ip adresy se nesynchronizují. Změny v aplikaci MAPS spouští démona MAPS (MD) k panice, což vede ke ztrátě synchronizace.