Emulex Family of Adapters

This article provides information about how to verify if a Network Interface Card (NIC) is compatible with a PowerEdge Server.

The article describes how to troubleshoot network connectivity issues for network cards.

PowerEdge servers with Emulex Fiber Channel (FC) driver version 12.01.12 may fail driver installation under Windows Defender Application Control (WDAC) Enforced Mode on Windows Server.

This is seen when using direct attached storage with an Emulex LPe35002-M2-D and Red Hat Enterprise Linux, the server fails to boot.

Microsoft Hyper-V Virtual Machine (VM) Live Migration may fail or no LUNs are mapped after powering on VMs due to Windows architecture and hardware configuration limiting the number of vFC LUNs.

Network port enumeration on Windows Server 2022 with Dell network adapters may swap port designations.

What is a common Network Partition and Teaming Mode mistake that may result in unexpected network issues.

Firmware updates using the iDRAC or LifeCycle Controller does not work on any Emulex 8 Gb fiber channel adapter.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

DELL OEM Emulex LPE12002 FC8 HBAs are not detected after upgrading from ESXi 6.7 to 7.0.

After a user updates to ESXi 7.0.3 (update 3) or later versions, VMware ESXi hypervisor may detect Emulex Fibre Channel Host Bus Adapter (FC HBA) devices twice in the storage core adapter list and assigns two different HBA names to the same UID.