POWEREDGE VRTX

This article explains how to create and assign VLANs to ports on the 2401 and 2210 VRTX switches.

This article explains how to perform a driver or firmware update directly from the operating system (OS) using a Dell Update Packages (DUP).

This article identifies which Operating System (OS) files the iDRAC Service Module (iSM) replicates the Lifecycle Controller (LC) logs to.

This article provides information about how to create a bootable USB drive from and OS ISO file for manual installation.

Dell OS and Applications Solutions on Dell TechCenter - Project Sputnik, Microsoft Windows, Red Hat Linux, SUSE, Ubuntu, and more

How to Identify the physical slot number in iDRAC based off the device name in vSphere/VSAN.

This article explains how to update the firmware of the internal drives of a VRTX.

Firmware updates using the iDRAC or LifeCycle Controller does not work on any Emulex 8 Gb fiber channel adapter.

This article describes how to reenable the Lifecycle Controller (LCC) when it goes into recovery mode.

This article provides information about how to update your system's firmware from the Lifecycle Controller on Dell servers.

This article explains how to check the iDRAC IP address on your Dell PowerEdge server using the LCD panel.

This article shows How To determine why a virtual machine powered off or rebooted by reviewing log files and host details to identify guest shutdowns, user or API requests, HA resets or system faults.

To replace a CMOS battery, remove the air shroud, disconnect and remove any expansion cards, locate the battery socket, and carefully pry out the CMOS battery. After installing a new CMOS battery, you must reinstall the expansion cards, install the air shroud, and restore the BIOS settings, ensuring the battery is operating properly and the correct data and time are set in the System Setup.

This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server. It is also relevant for 100% fan speeds.

Frequently Asked Questions (FAQ) about Physical Drives replacement in RAID Server and MD Arrays

The article describes updating Dell PowerEdge server firmware through Integrated Dell Remote Access Controller (iDRAC) 7, 8, 9, or 10. It details downloading the firmware image, logging in to the iDRAC web interface, uploading the image for installation, and managing pending updates.

This article provides information about identifying the hard driver properties in OMSA, system setup page, and iDRAC interface.

Explore various RAID levels - RAID 0, 1, 5, 6, and 10 - implemented in Dell PowerEdge servers. Learn about their configurations, benefits, and how they impact data redundancy and performance.

In some situations Dell Technical Support may request evidence to perform a more assertive diagnosis, this article illustrates how to attach files to your service request through the Dell support portal.

This page explains the difference between drivers and firmware and how to update them on Dell PowerEdge Servers using different methods.

Dell Enterprise SAS, SATA SSD: SMART predictive failures triggered by remaining write endurance falling below the threshold

Access the Windows Server ISO downloads. Get your Windows Server ISO file directly from Microsoft and ensure your PowerEdge server is up and running.

This article explains different methods to reset, power drain or perform a virtual AC cycle.

This article explains how to replace a cache disk in a vSAN configuration.

The firmware of PowerEdge server hard drives is a critical component in the server system. Regularly updating and maintaining this firmware is essential for server performance, security, and compatibility. Hard drive firmware updates can often fix known hardware faults and issues, address identified vulnerabilities and security problems, and potentially introduce new features, improvements, and enhancements.

Dell Samsung Serial Attached SCSI (SAS) PM1653 and PM1655 solid state drives may report excessive Sense Key faults 0x3, 0x11, 0x0, or 0x4, 0x29, 0x4. These faults have the potential to cause unexpected drive issues.

This article lists the PowerEdge RAID Controllers (PERC) by series family (generation) for Dell systems. There are several types of PERC controllers available depending on internal or external storage connectors, maximum drive support, and RAID support.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

This KB article contains a How to Video that covers how to Install OpenManage Server Administrator (OMSA) on a Windows Server.

Find answers and resources to get started or do more from your MyService360 dashboard with enterprise services data analytics and visualizations.