PowerFlex rack connectivity

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Data Center Infrastructure products. Dell carefully evaluates and monitors code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

PowerFlex R650 R750 nodes with Complex Programmable Logic Device (CPLD) firmware 1.0.7 or earlier may is unavailable at POST when BIOS 1.8.2 and iDRAC 6.00.30.202 are installed, triggering iDRAC PowerFlex alerts.

The PowerFlex Manager appliance is showing space alerts for the /var/log partition.

This article explains how to troubleshoot Oscillating counters failure.

Container Storage Modules (CSM) Container Storage Interface (CSI) Driver for PowerFlex pods are stuck in CrashLoopBackOff state with error "could not find given NAS server by name."

This article explains how to troubleshoot the alert PFX00102.0000206) The disk space diagnostic failed.

Top PowerFlex Software and Hardware Dial Home Alerts; PowerFlex

Dell iDRAC Service Module (dcism) versions earlier than 6.1 contain a defect: when the OS-to-iDRAC pass-through is lost, iSM enters Limited Functionality Mode and retries the connection in an unbounded loop. Every retry runs firewall-cmd --reload twice. The result is thousands of full firewalld reloads per day on the affected node, causing MDM disconnects, SDS decouples, and SCLI login failures.

Applying for a license from PowerFlex Manager Platform (PFMP) fails with the error "The license key is invalid or does not match this version (ASMCOMMONS.0049)."

This article explains how to reboot different node types for PowerFlex systems.

This article shows the PowerFlex release matrix, and guidance on how to correlate the various packages.

SDS remains disconnected after generating a new certificate due to an OS conversion.

This article explains how to troubleshoot events PFX00001.0704001 PFX00001.0704002 PFX00001.0704003 PFX00001.0704004

The CloudLink support matrix provides information about the supported hypervisors, platforms, key protectors, products, and PowerFlex versions for CloudLink.

Remediation is available for a vulnerability that could be exploited by malicious users to compromise the affected systems.

In the PFxM UI, there is an alert stating that events from the MDM are not being received.

Steps to reset PowerFlex oscillating errors.

The UI login page loads, but entering credentials shows an error; Pod remain running while authentication stalls at the SSO stage

Slow, non‑SSD storage on the cluster VMs leads to etcd latency over one second, triggering repeated pod restarts, node NotReady states and loss of PowerFlex Management Platform (PFMP) UI access.

PowerFlex reports that one of the dax devices is about to fail and should be replaced. NVDIMM correctable memory errors can cause a dax device to show as "Failed Now" in PowerFlex when the device is not truly failed.

PowerFlex Rack remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

After upgrading CloudLink to version 8.2 or 8.3, the web UI returns HTTP 404, and the VM network is unreachable.

This article explains how excessive data Role-switching causes I/O latency and errors.

Even after performing the clean command, the SDS device error does not clear. Below are steps on how this can be addressed.

Customers can update a single or a few components outside of the catalog in the existing RCM or IC using the Single Component Upgrade (SCU) feature. SCU helps with addressing business needs (zero-day security, updating, and so on) in a quick and expedited manner.

The alert shows a PowerFlex cluster device marked as failed, stopping all I/O and moving data to other disks; the root cause is a hardware fault such as a bad disk or SDS‑reported device error.

Use this procedure to recover users' lost passwords for the management VMs.

This article explains troubleshooting and manual installation/removal/configuration of the ESXi SDC.

PowerFlex version 3.6 and above detects when a port or socket frequently disconnects (flapping) and proactively disqualifies the path, preventing general disruption across the system. Customers must investigate the source of the interruptions with their internal team.

This article provides links to PowerFlex rack technical documentation.