PowerSwitch N2000 Series

Dell guidance to mitigate risk and resolution for the side-channel analysis vulnerabilities (also known as L1 Terminal Fault or L1TF) for servers, storage, and networking products. For specific information about affected platforms and next steps to apply the updates, see this guide.

This article explains how to stack N2000 and N3000 series switches.

This is a general guide on how to get the Service Tag from dell switches (OS6, OS9, OS10, or SONiC).

Enterprise SONiC license key

For the Dell PowerSwitch and Cisco Nexus switches, syslog can be transmitted through TLS and audit logs. Ensure TACACS (terminal access controller access-controller system) is used for the audit logs.

This document highlights minimum, recommended, and latest code versions for Dell Technologies Networking products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

The issue is about new routes are not being installed in the Broadcom hardware on Dell S5248F switches. OS10 can learn new routes, but it is not able to install them in the Broadcom hardware tables. This issue affects all platforms and all OS10 versions, but could be mitigated using switch's configuration or different platforms where the tables are larger than S5200.

How to save the running configuration on a Dell N series switch running OS6 using the Web Interface.

How to configure Unidirectional Link Detection (UDLD) in Dell N series switches running OS6.

This article explains how to allow SSH in a Dell Networking N-series switch running OS6.

This article explains how to assign an Initial Company Administrator.

OS6 Stack - How to Resolve "Cfg mismatch" Switch Status on an OS6 Stack.

This article explains how to promote Company Administrators.

This article explains Dell guidelines on company administrator assignment.

Dell Networking N-series version 6.5 (and newer) code using Link Layer Discovery Protocol (LLDP) with older Cisco phones placed into incorrect VLAN

This article explains how to configure TACACS or Radius authentication on N-series switches.

Dell EMC Networking OS 6 remediation is available for a Linux Kernel vulnerability that may be exploited by malicious users to compromise the affected system.

This article discusses the process to recover access to a Dell switch running OS6 if the password is lost or forgotten.

This article explains how to directly log in to Privileged EXEC Mode remotely on a Dell N-Series Switch running OS6. SSH or Telnet can be used for this login method.

This article provides switch configuration guidance for Dell PS Series and SC Series SANs. Switch vendors include Arista, Brocade, Cisco, Dell, Huawei, HP, Juniper, and others.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

As a part of the deployment guidance for Dell EMC Storage Spaces Direct Ready Nodes, for infrastructures that use RoCE v2 for RDMA using Mellanox CX4 LX adapters, we recommend disabling DCBX willing globally in the host OS and setting network adapter DCBXMode to Host in charge.

Troubleshooting the Switch Fabric Module

This article discusses the limitations Bonjour protocol (AirPrint and AirPlay) and multicast routing on Dell Networking Switches.

Support for mixed stacking between Dell Networking N3000 Series and N2000 Series switches running the Dell Networking 6.5.x.x operating system.

This guide provides instructions on how to configure management networks for accessing networked devices using console servers, Ethernet out-of-band, and Ethernet in-band. Large production networks can span across multiple rooms, buildings, or cities, and contain dozens or hundreds of network switches. Using a management network separate from the production network is often desired to configure and manage these environments. There are three types of management networks that are discussed in this guide, each offering its benefits. Network administrators may use one or more methods to configure, test, and manage their setups.

The purpose of this guide is to provide general guidelines for troubleshoot layer 1 connectivity issues when using transceivers in Ethernet switches.

Best practices for troubleshooting Power Supply Units (PSUs) errors or failure on Dell Ethernet switches

A brief overview of basic troubleshooting steps across all Dell switch platforms for a switch that appears to be unresponsive.

How to create Virtual Local Area Networks (VLANs) on PowerSwitch devices running Dell Networking OS6.