Isilon Gen6

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

The Dell PowerScale OneFS Info Hubs provide links to OneFS documentation.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

This is an FAQ article on common PowerScale Licensing scenarios during the activation process.

This article provides links to several Dell Community pages.

Receiving an Error 18 at 0 depth message when validating the certificate signing request for the source or target cluster

The /var partition expansion may cause warning messages in the Isilon On-Cluster Analysis tool (IOCA). The issues are related to a node panic that may occur when removing a drive sled for maintenance purposes.

All the masking view information is visible in SYMCLI. The customer is unable to see the masking view information for all local arrays. Within Unisphere, none of the array masking view details are visible.

Gen6 nodes in the cluster are logging events that nodes cannot communicate with the BMC and may show nodes in a RO state. Rebooting the node causes it to split from the cluster.

This article describes Intermittent disconnection to PowerScale nodes' dynamic IPs during rolling reboot or rolling upgrade. This happens due to invalid (old) Address Resolution Protocol (ARP) entries on the client.

This article describes an interoperability issue between PowerScale nodes running Mellanox Network Interface Controllers (NICs) and Cisco Application Centric Infrastructure (ACI) leaf ports.

Starting from OneFS 9.3.0, OneFS supports Hadoop Distributed File System (HDFS) Access Control Lists (ACL) to improve compatibility. It is disabled by default. This article describes the steps to enable HDFS ACL.

A node fails to boot with the message GEOM start failed.

Applying Node Firmware Package (NFP) 10.3.9 or 11.6 or above could cause a node with an aged Battery Backup Unit (BBU) to go into read-only mode.

How to address Battery Backup Unit (BBU) alerts on Generation 6 hardware. Event ID: 900160008

To disable isi ipmi functionality, all options set must be disabled.

This article discusses how to check the boot mirror health on Gen6 and Gen6.5 nodes.

In this specific case, two new nodes would not provision in to the nodepool. The customer had a 16 node H500 cluster. The last two nodes installed have a single SSD drive with size 1.6T and not 3.2T as found with the other 14 nodes.

How to identify the correct power supply unit (PSU) slot in Gen6 nodes that requires replacement.

How to Powercycle Gen6 Nodes.

SyncIQ policies fail with error No node on source cluster was able to connect to target cluster on OneFS 9.1 and later versions. This is due to the encryption required flag being automatically set to yes.

A high number of vnodes accumulating in memory can result in one or more nodes getting into an Out Of Memory (OOM) condition. Any cluster using Snapshots and SmartPools that is running OneFS 9.11 or later can have this issue.

Node fails to boot, stating either 'No bootable partitions found' or 'PSI receipt does not exist in mfg partition'. (User Correctable)

This article explains how to use the Isilon OneFS isi_auth_expert command to manage authentication.

PowerScale Info Hub for OneFS 9.13.0.0 documentation

Gen 6: Increase Ierrs on netstat -i for bge interface.

Sophos Intercept X does not quarantine detected malware and infected files. It prevents access to the infected file and send email notification to the Administrator.

A memory leak in the LWWIT process causes WERR_GEN_FAILURE errors.

The isi_estar command displays two sensor values which are used to gain Energy Star 2.0 compliance. Only certain node types are supported.

Intermittent failures saving a file in a username expanded home directory when the computer account also connects to the share but cannot find the file.