PowerMax

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

How to verify PowerMax or VMAX single path devices using Unisphere for PowerMax?

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

When Replication Data Pointer (RDP) thresholds are surpassed, the array creates alerting messages for users to address the situation.

A curated list of technical information resources such as guides, checklist, simple support matrix, and how-to videos to help with PowerMax deployment and use.

This article provides guidance on how to view PowerMax or VMAX Host LUN ID using Unisphere and Solutions Enabler and Modify existing PowerMax or VMAX Host LUN ID using Unisphere.

Dell PowerMaxOS, Dell PowerMax EEM, Dell Unisphere for PowerMax, Dell Unisphere for PowerMax Virtual Appliance, Dell Unisphere 360, Dell Solutions Enabler and Dell Solutions Enabler Virtual Appliance remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

NetWorker Snapshot Management (NSM) backups may fail with Error relinking snapvx snapshot to target: Unable to perform action Link on SnapVX snapshot, error SYMAPI_C_ACCESS_DENIED.

Solutions Enabler (symcli) commands fail with the error "The requested feature is not supported for this microcode or SYMAPI version." This occurs after the PowerMaxOS in the array is upgraded to v10.2 or v10.3.

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

This article assists users when receiving an email alert from EMCSRDFAAlerts@emc.com.

Dell Unisphere for PowerMax and PowerMax EEM remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This KB article outlines how to zone WAN-COM ports on a single engine VPlex Metro.

Data Corruption during svMotion or Clone operation in 8.0 U2 ESX on Powermax V4 arrays

Hosts that are part of a datastore as part of a virtual volume on the array, can be vMotioned (migrated) from one ESXi to another. There is a particular set of rules that has to be adhered to for this to be successful.

An VMware SRM reprotect operation fails due to conflicting invalid tracks (SRA log file) when using SRDF SRA 10.0.0 or 10.1.0. with SRDF/A.

AppSync cannot re-link to a mounted target device.

Host may be impacted with high read latency of up to 3 seconds and TASK1 timeouts if an EDS director is in DD state. Fix 107048 is required.

FlashCopy THAW command fails with an ANTR8811E error.

The FlashCopy parameter ONLINTGT(NO) is causing excessive overhead during a FCESTABLISH. This is of particular concern if ACTION(FREEZE) is also specified as it will hold all host I/O for an elongated period.

VMAX All Flash and PowerMax: When there is a check for a read miss timeout, the timer value stored in a variable may overflow and this condition could generate 283C.01 call home errors.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

This article describes vMotion operations from the perspective of PowerMax.

Dell PowerMaxOS, Dell PowerMax EEM, Dell Unisphere for PowerMax, Dell Unisphere for PowerMax Virtual Appliance, Dell Unisphere 360, Dell Solutions Enabler Virtual Appliance remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This article explains how to assign an Initial Company Administrator.

This KB article explains how to use E-Lab Navigator simple support matrix options to determine VMAX and PowerMax supported platforms.

ESXi 6.7 servers with Emulex fibre channel HBAs are not able to access LUNs on Dell EMC PowerMax storage after installing lpfc driver version 12.8.317.0.

Dell PowerMaxOS, Dell PowerMax EEM, Dell Unisphere for PowerMax, Dell Unisphere for PowerMax Virtual Appliance, Dell Unisphere 360, Dell Solutions Enabler and Dell Solutions Enabler Virtual Appliance remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

General queries about vVols

Detailed procedure to upgrade Solutions Enabler and Unisphere for PowerMax.