VxFlex Ready Node

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This article details the procedure to troubleshoot power supply unit (PSU) issues that may arise on a PowerEdge Server.

vCenter showing "Warning: High pnic rx generic error rate detected on vmnicX" and "High pNic error rate detected, Check the host's vSAN performance view for details" warning messages.

This article explains the steps to clear the cosmetic alert INVALID_POSTGRES_INSTANCE_ROLE after upgrade from 4.6 to 4.8

After replacing the mainboard and TPM on a PowerFlex R650 server, the system may not boot because the BOSS card is missing from the boot sequence, even though BOSS and its virtual disk appear healthy in the iDRAC and BIOS.

After an unexpected SDS server power cycle, the MDM is reporting many fixed read errors.

This article walks you through configuring PowerFlex Customer Identity and Access Management (CIAM) for SSO with Microsoft Azure Entra ID using OIDC.

This article lists the PowerFlex hardware End of expansion (EOexp) and Software End of Standard Support (EoSS) codes.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Spontaneous reboot with error "The System board BP1 PG voltage is outside of range"

This article has information about the KMIP CA Certificate is expired alarm.

This article explains how to upgrade tpm firmware using iDrac UI

This section is to assist you in responding to unexpected power loss. This Article is a general guideline and has not been tested in every scenario. If at any point there is a failure, contact Dell Technologies Support.

This KB provides a workaround for the issue for PowerFlex Manager Platform (PFMP) 4.8 systems.

This article explains how to Resynchronize a Compliance file or OS repository that is in an error state.

Opening CloudLink Web UI with Chrome or Edge receives the error "ERR_SSL_KEY_USAGE_INCOMPATIBLE," Mozilla and Firefox open CloudLink Web UI without any issues.

This article outlines the PFMP diagnostic alert logic and possible remediation steps for events and alerts related to the PFMP diagnostic suite.

This article explains how to troubleshoot PFX00102.0000210 - etcd quota exceeded diagnostic failure.

This article explains how to troubleshoot the alert PFX00056.0000001 - The Events and Alerts service is unavailable - NATS is down.

This article explains how to troubleshoot the alert PFX00102.0000209 - The etcd certificate is about to expire

This article explains how to troubleshoot the alert PFX00102.0000207 - The PowerFlex management platform message bus health diagnostic failed.

This article explains how to troubleshoot the alert PFX00102.0000206) The disk space diagnostic failed.

This article explains how to troubleshoot the alert PFX00102.0000205 - The PowerFlex management platform nodes internal connectivity diagnostic failed.

This article explains how to troubleshoot the alert PFX00102.0000204 - The internal DNS lookup diagnostic failed.

This article explains how to troubleshoot the alert PFX00102.0000202. The PowerFlex management platform is in an unstable or unavailable state that might also affect access to PowerFlex Manager. If an additional database instance fails, it can result in data loss. Avoid making changes to PowerFlex Manager such as adding new users, resource groups, and more because it might not be saved as expected.

This article explains how to troubleshoot the alert PFX00102.0000203 - The etcd performance diagnostic failed.

All PowerFlex Node's date and time need to be synched with the MVMs for mTLS to work.

This article explains how to troubleshoot the alert NODE_STATUS_DIAGNOSTIC_FAILURE - The following nodes are not in a ready status or unreachable status: {{node_names}}

This article explains how to troubleshoot the alert PFX00102.0000200 - POD_STATUS_DIAGNOSTIC_FAILURE

ESXi servers stop responding in vCenter due to the All Paths Down (APD) state on one or more of the PowerFlex volumes.