VxFlex Ready Node

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Data Center Infrastructure products. Dell carefully evaluates and monitors code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This article provided links to PowerFlex software documentation.

This article explains how to Calculate Spare Capacity

This article explains the calculation for storage pool free capacity in PowerFlex.

How to get the Firmware version and other details of any device on a Dell PowerEdge server using racadm.

vMotion between ESXi hosts fails due to configuration mismatch of VHV setting.

This article explains how to reboot different node types for PowerFlex systems.

iDRAC logs show MEM7114 critical memory events that can be false‑positive DIMM errors. The root cause is a BIOS firmware defect that misreports memory faults, particularly when C‑States are enabled.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

This article explains how to troubleshoot Oscillating counters failure.

Container Storage Modules (CSM) Container Storage Interface (CSI) Driver for PowerFlex pods are stuck in CrashLoopBackOff state with error "could not find given NAS server by name."

This article explains how to troubleshoot the alert PFX00102.0000206) The disk space diagnostic failed.

Top PowerFlex Software and Hardware Dial Home Alerts; PowerFlex

Dell iDRAC Service Module (dcism) versions earlier than 6.1 contain a defect: when the OS-to-iDRAC pass-through is lost, iSM enters Limited Functionality Mode and retries the connection in an unbounded loop. Every retry runs firewall-cmd --reload twice. The result is thousands of full firewalld reloads per day on the affected node, causing MDM disconnects, SDS decouples, and SCLI login failures.

This article shows the PowerFlex release matrix, and guidance on how to correlate the various packages.

SDS remains disconnected after generating a new certificate due to an OS conversion.

This article explains how to troubleshoot events PFX00001.0704001 PFX00001.0704002 PFX00001.0704003 PFX00001.0704004

The CloudLink support matrix provides information about the supported hypervisors, platforms, key protectors, products, and PowerFlex versions for CloudLink.

Remediation is available for a vulnerability that could be exploited by malicious users to compromise the affected systems.

Steps to reset PowerFlex oscillating errors.

The UI login page loads, but entering credentials shows an error; Pod remain running while authentication stalls at the SSO stage

PowerFlex reports that one of the dax devices is about to fail and should be replaced. NVDIMM correctable memory errors can cause a dax device to show as "Failed Now" in PowerFlex when the device is not truly failed.

PowerFlex Software remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

After upgrading CloudLink to version 8.2 or 8.3, the web UI returns HTTP 404, and the VM network is unreachable.

Even after performing the clean command, the SDS device error does not clear. Below are steps on how this can be addressed.

After sanitizing or replacing an NVDIMM, adding the acceleration/dax devices back into PowerFlex Manager will generate an IO error if the namespace or region is in an error state. This will hinder the ability to add the devices back into PowerFlex as expected.

Use this procedure to recover users' lost passwords for the management VMs.

This article outlines the response from PowerFlex Engineering to the security issues described in VMware Security Advisory VMSA-2026-0006

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

How to update the firmware on a G5, G6, and G7 Panduit PDU.