Red Hat Enterprise Linux Version 9

Dell Red Hat Ansible Modules allows Data Center and IT administrators to automate and orchestrate the provisioning, configuration, deployment, and update of PowerEdge Servers by leveraging the out-of-band (agentless) management automation capabilities built into the Integrated Dell Remote Access Controller (iDRAC), Dell OpenManage Enterprise-Modular, and Dell OpenManage Enterprise.

This article explains how to download, install, and use the Dell PowerEdge RAID Controller (PERC) Command-Line Interface (CLI) utility to manage your RAID controller. The utility is supported on PERC Series 8 and later family controllers on hosts running Windows, Linux, or ESXi. PERCCLI can also extract RAID controller logs which contain information that allows you or Dell Technical Support to determine the status of RAID controllers and the connected storage devices to narrow down possible sources of error.

Mellanox Network Interface Controllers (NIC) disappear in RHEL 9.4 when NVMe drives are reseated.

Performing a "yum update" check for Red Hat Enterprise Linux or SuSE Linux for Enterprise Servers updates may fail due to improper iDRAC RPM in the Dell YUM repository on linux.dell.com.

Inband updates to Open Server Manager (OSM) with .bin DUP results in a watchdog soft lockup error. Update is successful.

NVIDIA Mellanox OpenFabrics Enterprise Distribution (OFED) 23.10-0.5.5.0 driver package does not show Red Hat Linux 9.3 as a supported Operating System (OS) version.

After successful installation of NVIDIA GPU driver on Red Hat Enterprise Linux 9.3, performing nvidia-smi operations may report "no devices found."

The issue is cosmetic. There is no functional impact. The lspci -v command requires certain labels to read. Labels are missing from the current Basic Input Output System (BIOS) but are added to June block BIOS v2.2.4.

Observed "VPD access failed" in Red Hat Enterprise Linux (RHEL) kernel log for (CPU Direct Attach) 24x2.5 NVMe Gen5 switch backplane.

Installing Red Hat Enterprise Linux through the Dell Lifecycle Controller (LCC) when installation media is mounted over a Remote File Share (RFS) may result in a failed install. This applies to the Dell PowerEdge C6615 when using the Broadcom Lan on Motherboard (LOM).

When attempting to join a node to an existing Linux cluster, getting a "warning: csync2 run failed - some files may not be sync'd" and "error: cluster.join: [Errno 2] No such file or directory: '/etc/corosync/corosync.conf' messages

Importing the Dell key signed by "PG Hypervisor Engineering" into Red Hat Enterprise Linux 9 causes the error "Signature not supported". This key is only used for VMware purposes with no failure and is not necessary for any other Linux versions.

iDRAC Service Module (iSM) 5.2.0 and earlier on any supported Linux version fails to start its service with a SEC0704 error logged if the install path of its binaries contains a symlink to a different path. Alternative install paths are not accepted by iSM’s own binary verification system.

Beginning with the Windows 11 May CI upgrade, Microsoft enables Smart App Control (SAC) to further strengthen the security on Windows 11 devices.

The steps listed below explain how to locate the serial number, vendor, firmware version, and physical slot mapping of an SAS/SATA/SSD hard drive on PowerEdge servers running Linux Operating System or from the gathered SOS report.

Red Hat system not booting and goes into maintenance mode due to the Virtual File Allocation Table (vfat) module blacklisted.

BIOS, CPLD, Backplane, PSU, or few other firmware update on Red Hat Enterprise Linux (RHEL) 9 may report failure when update attempted using Dell Update Package (DUP).

This article describes operating system recovery options available in Windows 11 SE.

With OMSA 10.3 and older specifying the CLI command to set up an alertaction to launch a specific binary or shell script may result in an "XML Transformation failed" error with the execappath option.

This article describes how to enable the Amazon Appstore Preview on Windows 11.

This article provides information about Wi-Fi 6E not supported on client Linux Operating System (OS).

Explore this article to troubleshoot wireless networking for your home network on Windows 11. Also, for help with setting up, connecting, sharing files, photos, music, and troubleshooting your wireless network see the appropriate section.

Vulnerabilities in GRUB (Grand Unified Bootloader) may allow Secure Boot bypass.

What is a common Network Partition and Teaming Mode mistake that may result in unexpected network issues.

Steps for getting printing to work on Red Hat and SUSE Linux.

This article provides information about issues with EDAC errors in 'messages' log in Red Hat Enterprise Linux (RHEL).

This article outlines how to create a firmware baseline, view compliance reports, and apply updates in Dell OpenManage Enterprise.

Explore the Windows 10 Magnifier Tool and its modes: Full Screen, Lens, and Docked. Check how to switch between these modes to enhance screen magnification and functionality on your Windows 10 system.

This article provides information about how to test available network bandwidth using iperf3.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.