PowerEdge R6725

Unsure about the procedure to update a specific component's firmware in a PowerEdge system? Learn how to in this specific article.

This article details the most recent firmware version for Integrated Dell Remote Access Controller 10 (iDRAC10), designed for Dell PowerEdge servers from the 17th generation onwards.

This article provides information about Intermittent High Fan Speeds on Dell 17G PowerEdge Servers with NVIDIA ConnectX-6 OCP Cards installed.

This KB is to provide information about Dell customized VMware ESXi support stance on the Dell 17th generation of PowerEdge servers. The 17th generation of PowerEdge servers is based on Intel® Xeon® 6500P/6700P (Granite Rapids SP) and AMD EPYC™ 9005 Series Processor (Turin).

Dell PowerEdge 17th Generation Servers: A rare issue exists with Delta power supplies (PSU) that causes a PSU mismatch.

New deployments of OpenManage Enterprise 4.4.0 are experiencing service failures after configuring the time zone for GMT +02:00 Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius. The issue is only seen on fresh deployment of OpenManage Enterprise (OME) 4.4.0 on Hyper-V. Deploying OpenManage Enterprise (OME) on other hypervisors is not impacted.

R7725, R6725, R7715, and R6715 the number of CPU Cores is not recognized correctly.

Dell PowerEdge 17G servers that shipped before March 24, 2025 will prompt for Liquid Cooling capability after updating iDRAC10 firmware.

PowerEdge: Dell service support for end of industry production of 2.5" 15k RPM SAS hard drives

Dell Micron 9550 E3.S NVMe Drive Activity-Led light turns off for a few seconds.

Leveraging the 'Reboot Required' filter and selecting all items in this filtered view results in the 'make compliant' job applying all non-compliant firmware components. An unexpected reboot of the target is seen as components that do require a restart are deployed to the target. The issue is only seen if selecting all objects and using the 'Reboot Required' filter. All other filters work as designed.

PowerEdge servers crash with PCIe fatal errors while updating Kioxia CM6 NVMe drive firmware.

Performance drops after power supply unit (PSU) cable removal and does not recover upon reconnection, despite the A/B Grid Redundant policy being active in iDRAC10.

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

Observing system stop responding or Purple Screen Of Death (PSOD) during ESXi 8.0 U3 installation,

Seagate Summit SAS/SATA drives report medium errors or sense key 3/11 on PowerEdge and PowerVault systems due to a firmware issue causing weak writes to a drive sector.

The BIOS setting changes may not appear in iDRAC if configured using the F11 Boot Manager on Dell PowerEdge 16G and 17G platforms.

In Windows Server 2025, when leveraging CPUs with more than 256 cores, the Broadcom BCM5720 fails to retrieve a DHCP address, leading to no network connectivity.

OpenManage Enterprise version 4.1 entitlements feature will no longer work after October 2024 due to the decommissioning of legacy OAUTH APIs. Also, the standalone Dell License Manager application is end-of-life.

When editing a deployment template the 'Edit Components' screen is stuck with the 'Loading' animation. Also, when editing a compliance template the 'Template Details' screen is blank.

The article describes how to troubleshoot network connectivity issues for network cards.

Seagate Skybolt and SkyboltServoBP drive fails with medium format corrupted errors.

This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server. It is also relevant for 100% fan speeds.

Connection Status shows disconnected for all devices in OpenManage Enterprise Services (OMES) plugin 4.1.0 under the Site Health tab - Managed Devices page.

Multiple SKHynix NVMe (PS1010) drives in the same server experienced PCIe link training failures during the deployment phase, resulting in the drives entering read-only mode.

Viewing the VLAN details of a deployment template's network settings list devices that are not associated to the template.

This article provides information about Fatal BUS errors seen with PCI1360 and PCI1318.

How to create Cluster Shared Volumes by manually calculating the necessary disk space value.

Dell Intel SATA SSD drives may report a not correctly functioning PDR3 event, potentially resulting in a drive failure condition.

Dell solid state drive (SSD) fails after system reports low environment operating temperature.