Connectrix

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

Customer configured SNMP, traps not being sent to the recipient server

This article describes Cisco Kernel messages in 97xx switch models.

This article provides estimates on scheduling lead time when booking RPS upgrades.

The ESRS plugin scripts fills up the temp directory and space on the switch which might results in NXOS crash.

Port shown as invalidBinding due to port-security violation

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

DS-6520B Hardware failure might result in a thermal event.

Connectrix B-Series switch reported marginal due to HA is not in sync.

This article explains how to assign an Initial Company Administrator.

Job for schedule XbarErrorMonitor error is printed in the logging log when the JavaScript Object Notation (JSON) file for XbarErrorMonitor_Schedule is corrupt.

Environment: FOS-based switches with MAPS enabled, the user received MAPS-1003 alerts indicating multiple temperature sensors were OUT_OF_RANGE.

Fibre Channel over IP (FCIP) module is unresponsive and reloads.

This KB article describes a switch reloaded due to a Machine Check Exception.

This article explains how to promote Company Administrators.

This KB article describes how to create Zoning for CISCO switches using the Command Line Interface (CLI).

This article explains Dell guidelines on company administrator assignment.

Dell Connectrix B-Series remediation is available for OpenSSH Vulnerability that could be exploited by malicious users to compromise the affected system.

Filter by attribute does not work properly when adding existing zones to a zoneset in NDFC.

Post ISSU (lower than 9.3.2) or 64Gb sfp insertion, messages displayed informing of no 64Gb SerDes support.

C3 TX discards logging on ISL’s, when ISL R_RDY Mode turned on and HP 3PAR storage in the environment with IOCTL messages turned on.

The switch user does not have privilege to access all possible VFs.

Ports in the card are stuck on MOD_Val.

Connectrix Brocade B-Series: How to check if a 32G switch has a degraded SFP after upgrade to the fixed version of Fabric OS 8.1.2f and 8.2.1 and later.

Unable to access DCNM SAN Server from DCNM SAN Client, due to "RequestSendFailed: EJBCLIENT000409: No more destinations are available" error.

Using the measured light power levels displayed in the sfpshow (Brocade) and the show interface transceiver details (Cisco) to identify physical layer issues with switch to switch (ISL) and node to switch connections.

Brocade B-Series SANnav Operator role user unable to log in with LDAP authentication.

Nexus Dashboard Fabric Controller (NDFC) does not show data for aggregate link/port-channel with MDS switch firmware lower than NX-OS 9.4.3.

While configuring the Brocade switch for tacacs+ user authentication. User is then pointing to a tacacs+ server application called tacacs.net. User authentication passes but user is unable to run any commands.