PowerEdge C4130

Learn to configure and troubleshoot the IDRAC service module (ISM), including OS Passthrough, network interface checks, and TLS handshake issue resolution.

Understand and troubleshoot PowerEdge hard disk drives, RAID, PowerEdge RAID Controller, and other storage hardware such as cables, backplane, so forth.

The information below covers the steps involved in installing SLES 15 OS in Dell EMC PowerEdge Servers using HTTP Boot.

Dell PowerEdge servers with common design components are grouped into generations, for example PowerEdge 17th generation servers, 16th generation, 15th generation, or 14th generation. This article provides general guidance for PowerEdge server model naming convention to identify the generation and common components. This article also lists all PowerEdge servers by model including type, CPU, generation, and remote management components.

Dell Intel SATA SSD drives may report a not correctly functioning PDR3 event, potentially resulting in a drive failure condition.

Dell PowerEdge servers do not support operating system installation, or boot from direct CPU‑attached NVMe SSD drives if the metadata format size is not set to 0.

Explore various RAID levels - RAID 0, 1, 5, 6, and 10 - implemented in Dell PowerEdge servers. Learn about their configurations, benefits, and how they impact data redundancy and performance.

This article provides PowerEdge server troubleshooting for No Power, No POST, No Boot and No Video issues. This includes blade, rack, and tower servers.

This article provides information about how to verify if a Network Interface Card (NIC) is compatible with a PowerEdge Server.

This article explains how to use iDRAC Direct to manage your PowerEdge server.

This article provides a brief introduction to the Intel® VROC and describes how to configure it on Dell PowerEdge servers.

This article provides information about the VLT0204 error code and guidance.

When working on internal components of a Dell computer, follow the safety precautions that are provided in this article to avoid any harm on the hardware.

This article describes how to install RACADM on VMware ESXi and demonstrates how to change the iDRAC IP address using RACADM commands.

Dell PowerEdge Server BIOS remediation is available for an improper parameter initialization vulnerability that could be exploited by malicious users to compromise the affected system.

In some situations Dell Technical Support may request evidence to perform a more assertive diagnosis, this article illustrates how to attach files to your service request through the Dell support portal.

Dell PowerEdge Server BIOS remediation is available for an Improper Privilege Management Security Vulnerability that could be exploited by malicious users to compromise the affected system.

High SMART error rates on some Enterprise hard drive are informational and have no bearing on hardware health.

Learn how to create a bootable USB with Rufus to update Dell PowerEdge servers. Follow the step-by-step instructions to prepare and create a bootable USB media.

Dell PowerEdge Server remediation is available for Tianocore EDK2 Vulnerability that could be exploited by malicious users to compromise the affected systems.

If ESXi hosts use Trusted Platform Module (TPM), this article provides steps when the ESXi host is still accessible over SSH before any hardware changes.

To ensure optimal performance and stability for your Dell system, be aware of the latest updates available for the drivers and firmware. There are several systems to do this as explained in the article below.

This article provides instructions on how the customer can gather their recovery key from their Trusted Platform Module (TPM) enabled host. The customer should keep the recovery key from each of their hosts in a safe place. Hardware replacement activities, such as system board replacements, require the recovery key for a smooth process.

This article provides information about how to boot past the Driver Health Manager Screen.

This article provides information about the LIC008 error seen when importing the IDRAC License.

This article explains what a predictive drive failure (error code PDR16) means, why it occurs, and provides step-by-step instructions to troubleshoot and resolve the issue. It covers recommended actions such as backing up data, updating firmware, and replacing the disk if necessary to ensure storage health and prevent data loss.

This page explains the difference between drivers and firmware and how to update them on Dell PowerEdge Servers using different methods.

The PowerEdge embedded LifeCycle Controller provides a simplified method for installation of supported Windows Server and Linux server operating systems with the OS Deployment feature. This article explains how to use the iDRAC LifeCycle Controller to install a supported operating system on most Dell PowerEdge servers. Step-by-step instructions and OS installation videos for Windows Server, Ubuntu Server LTS, SUSE Linux Enterprise Server, or Red Hat Enterprise Linux installation with LifeCycle Controller

This article explains how to create a Virtual Disk using the System Settings menu.

This article provides links to download Dell trial 30 and 90-day evaluation license collection including iDRAC Enterprise, iDRAC Datacenter, Chassis Management Consoles (CMC) Enterprise, OpenManage Enterprise, and OpenManage Integration.