Red Hat Enterprise Linux Version 8

Dell Red Hat Ansible Modules allows Data Center and IT administrators to automate and orchestrate the provisioning, configuration, deployment, and update of PowerEdge Servers by leveraging the out-of-band (agentless) management automation capabilities built into the Integrated Dell Remote Access Controller (iDRAC), Dell OpenManage Enterprise-Modular, and Dell OpenManage Enterprise.

A group of disclosed vulnerabilities in GRUB (Grand Unified Bootloader), known as "BootHole", can allow for Secure Boot bypass.

PowerEdge XE7740 shows a Purple Screen of Death (PSOD) after NVMe Drives are moved to empty slots. A BIOS update fixes this issue.

Performing a "yum update" check for Red Hat Enterprise Linux or SuSE Linux for Enterprise Servers updates may fail due to improper iDRAC RPM in the Dell YUM repository on linux.dell.com.

This article is a guide to How to collect the Dell SupportAssist Log/TSR report from the Rocky Linux based Live Environment Support Live Image (SLI)

The issue is cosmetic. There is no functional impact. The lspci -v command requires certain labels to read. Labels are missing from the current Basic Input Output System (BIOS) but are added to June block BIOS v2.2.4.

On the PowerEdge R940 server running Ubuntu 20.04 or RHEL 7 and 8 Operating Systems, the Network Interface Controller (NIC) naming has an inconsistency compared to other Dell 14G or 15G PowerEdge servers.

Observed "VPD access failed" in Red Hat Enterprise Linux (RHEL) kernel log for (CPU Direct Attach) 24x2.5 NVMe Gen5 switch backplane.

PowerEdge R7525 with PowerEdge RAID Controller (H345, H745) experiences a significant I/O throughput drop during sequential read testing with over 10 SSD drives in non-RAID mode.

Installing Red Hat Enterprise Linux through the Dell Lifecycle Controller (LCC) when installation media is mounted over a Remote File Share (RFS) may result in a failed install. This applies to the Dell PowerEdge C6615 when using the Broadcom Lan on Motherboard (LOM).

When attempting to join a node to an existing Linux cluster, getting a "warning: csync2 run failed - some files may not be sync'd" and "error: cluster.join: [Errno 2] No such file or directory: '/etc/corosync/corosync.conf' messages

iDRAC Service Module (iSM) 5.2.0 and earlier on any supported Linux version fails to start its service with a SEC0704 error logged if the install path of its binaries contains a symlink to a different path. Alternative install paths are not accepted by iSM’s own binary verification system.

Beginning with the Windows 11 May CI upgrade, Microsoft enables Smart App Control (SAC) to further strengthen the security on Windows 11 devices.

The steps listed below explain how to locate the serial number, vendor, firmware version, and physical slot mapping of an SAS/SATA/SSD hard drive on PowerEdge servers running Linux Operating System or from the gathered SOS report.

Red Hat system not booting and goes into maintenance mode due to the Virtual File Allocation Table (vfat) module blacklisted.

This article describes operating system recovery options available in Windows 11 SE.

ls command hung on RHEL 8.4 client when mounting Unity NFS export via NFSv4.

With OMSA 10.3 and older specifying the CLI command to set up an alertaction to launch a specific binary or shell script may result in an "XML Transformation failed" error with the execappath option.

This article describes how to enable the Amazon Appstore Preview on Windows 11.

OpenManage Server Administrator 10.1.0 for RHEL7, RHEL8, and SLES15 requires the 10.1.0.1 patch for specific 15G, 14G Intel, and AMD PowerEdge platforms that now ship with or have parts replaced with revised PERC 10, PERC 11, and Host Bus Adapter (HBA) controllers due to supply chain issues. Since these revised controllers only support specific server models, the OMSA 10.1.0.1 patch cannot be posted to the Dell Linux repository and must be installed separately.

This article provides information about Wi-Fi 6E not supported on client Linux Operating System (OS).

Explore this article to troubleshoot wireless networking for your home network on Windows 11. Also, for help with setting up, connecting, sharing files, photos, music, and troubleshooting your wireless network see the appropriate section.

If during a Mount and Recover operation of an Oracle Database on a Red Hat Linux server takes over 5 minutes to start up AppSync may time out while waiting. Subsequent unmount jobs will fail for the same reason.

Vulnerabilities in GRUB (Grand Unified Bootloader) may allow Secure Boot bypass.

On AMD Rome two-socket systems with an Intel E810 Network Interface Card (NIC) plugged in, an OS crash is observed when Red Hat Enterprise Linux 8.3 is installed.

The following article provides information about the design limitations of the Linux operating system.

Caps Lock does not function as expected when the system is in text mode and the system is being accessed using iDRAC Virtual Console.

What is a common Network Partition and Teaming Mode mistake that may result in unexpected network issues.

This article explains how to download, install, and use the Dell PowerEdge RAID Controller (PERC) Command-Line Interface (CLI) utility to manage your RAID controller. The utility is supported on PERC Series 8 and later family controllers on hosts running Windows, Linux, or ESXi. PERCCLI can also extract RAID controller logs which contain information that allows you or Dell Technical Support to determine the status of RAID controllers and the connected storage devices to narrow down possible sources of error.

Steps for getting printing to work on Red Hat and SUSE Linux.