VxRail E660N

On December 10, 2021, a critical remote code vulnerability was published concerning the Apache Log4j library. Later, CVE-2021-45046 was reported. VxRail is impacted by these vulnerabilities. Fixes and workarounds for CVE-2021-44228 and CVE-2021-45046 are documented in the tables included in this article.

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

Event code: VXR500PCI1356 This event code indicates "A bus uncorrectable error was detected on a component at slot <number>."

Update job fails due to connectivity migration issue when upgrading VxRail to 7.0.350 or above.

Event code: VXR500PCI2002 This event code indicates "A fatal IO error detected on a component at slot <number>."

Event code: VXR500FAN0003 This event code indicates "Fan <number> RPM is greater than the upper critical threshold."

Event code: VXR500PCI1320 This event code indicates "A bus fatal error was detected on a component at bus <bus> device <device> function <func>."

Event code: VXR500CTL59 This event code indicates "<Controller name> SAS expander error: <args>"

Event code: VXR500PCI1358 This event code indicates "A fatal error was detected on a component at slot <number>."

Event code: VXR500PCI3006 This event code indicates "Failed to get Link Tuning or FlexAddress data from iDRAC."

Event code: VXR500CTL90 This event code indicates "<controller name> is not operating in Fault Tolerant Mode because of an incompatible peer controller."

Event code: VXR500PCI1354 This event code indicates "A bus correctable error was detected on a component at slot <number>."

Event code: VXR500PCI3004 This event code indicates "Device option ROM on mezzanine card <number> failed to support Link Tuning or FlexAddress."

Event code: VXR500PCI3000 This event code indicates "Device option ROM on embedded NIC failed to support Link Tuning or FlexAddress."

Event code: VXR500FAN1000 This event code indicates "<Fan Sensor Name> was removed."

Event code: VXR500CTL44 This event code indicates "Diagnostic message <message> from <Controller name>"

Event code: VXR500PCI3002 This event code indicates "Failed to program virtual MAC address on a component at bus <bus> device <device> function <func>."

Event code: VXR500PDR63 This event code indicates "A bad disk block on <physical disk> cannot be reassigned during a write operation."

Event code: VXR500PDR12 This event code indicates "<PD Name> initialization has failed."

Event code: VXR500PST0254 This event code indicates "General failure after video."

Event code: VXR500PDR85 This event code indicates "Security subsystem errors detected for <physical disk>."

This article provides different methods to find the product-serial number tag (PSNT) of a node.

A VxRail node equipped with an HBA355 as part of a vSAN cluster may report a Purple Screen with the message "… disk name: naa.5000xxxxxxxxx detected suspended I/Os..." or may report all drives that are attached to the HBA are missing due to an issue with the lsi-msgpt35 driver (version 17.00.02.00), which is in VxRail versions 7.0.210 through 7.0.300.

When adding nodes to a cluster the operation fails on building the disk group, but the task is still running in vSphere.

When spare capacity in PowerFlex is smaller than the size of the largest Fault Set, PowerFlex alerts the user. Increasing the spare capacity helps clear this alert.

Dell Storage Simple Support Matrices on E-Lab Navigator provide the optimal interoperability for your storage solution.

Dell VxRail upgrades from 4.x to 7.0.x or 8.0.x results in Multicast filtering mode reset. Broadcom vSphere Virtual Distributed Switch (VDS) upgrades affect Microsoft Network Load Balancing (NLB).

This article outlines the response from VxRail Engineering to the security issue described in VMware Security Advisory VMSA-2022-0004 and recommendations to fix or mitigate against the issue.

Adding a new VxRail cluster into the MGMT domain fails on the cluster discovery steps. "Failed to load cluster details: Failed to fetch response due to some internal error, check logs."

This KB article includes information about how to resolve the issue of "Server type is not supported" message from VxRail plugin Physical View.