VxFlex Ready Node

This article provides links to PowerFlex software documentation.

Dell PowerFlex remediation is available for the Apache Log4j Remote Code Execution Vulnerability that may be exploited by malicious users to compromise the affected system. Dell recommends implementing this remediation as soon as possible in light of the critical severity of the vulnerability.

This article explains using the Boot Optimized Storage Solution - S2 (BOSS-S2) configuration utility to import a foreign virtual disk, a feature only when the controller detects a foreign disk.

The guide explains converting a hard drive to non‑RAID by iDRAC, then claiming it for a PowerFlex Virtual Storage Area Network (VSAN) cluster and assigning cache or capacity roles.

The user is checking performance using FIO (also seen with vdbench) and reports high latency during a rebuild.

This article explain how to fix the restore operation failure when password is not encoded as mentioned in the admin guide

The ScaleIO Data Server (SDS) panics at startup, producing stack traces and causing a single‑point‑of‑failure state; a Security-Enhanced Linux (SELinux) rule set is suspected, on version 3.5.1.1.

PowerFlex upgrade from 3.6.0.6 to 4.5.2 fails, logs show “Failed to fork wrapper” and “Get Installed Components command was not successful” on nodes, caused by low memory and vCPU resources for SVMs.

Storage‑Only Resource Group (RG) deployment fails with missing MDM IPs, connection timeouts and ARP errors; the cause is unconfigured port channels required by Partial Network Automation (PNA).

Upgrade is blocked because a decommissioned vCenter remains in a compute‑only resource group on PFxM 3.6, preventing PowerFlex Management Platform from complying with the intelligent catalog.

The Collects Logs feature collects the logs from all the system nodes although only a few were selected.

Top PowerFlex Software and Hardware Dial Home Alerts; PowerFlex

This article explains the step by step procedure to restore PFMP from a backup file

Memory errors and CMCI storm entries in logs cause load, SDS stalls and decoupling; a failing Dual In-line memory module (DIMM) triggers interrupts, EDAC CMCI rate exceeds threshold, causing storm.

This KB explains how to perform the WSFC conversion at a high-level. It also covers converting an Oracle RAC environment from RDMs to shared VMDKs on NVMe/TCP, even though Oracle RAC does not require SCSI3‑PR. Oracle RAC can run on an SDC‑based VMFS datastore, but because PowerFlex does not support Clustered VMDK on SDC‑based VMFS, SCSI3‑PR‑dependent applications cannot use that configuration. Oracle RAC explanations are also high-level.

The customer is using PowerFlex SDR replication to test failover but the destination volume gets mounted "RO" in the multipath -ll output on the Oracle Linux server.

PowerFlex 3.x UI is inaccessible, receive a 404 error when trying to open it. PowerFlex 3.x is reachable from the CLI.

This article explains how to troubleshoot the alert PFX00056.0000001 - The Events and Alerts service is unavailable - NATS is down.

This article explains how to troubleshoot the alert "PFX00102.0000209 - The ETCD certificate is about to expire."

This article shows the PowerFlex release matrix, and guidance on how to correlate the various packages.

Dell Storage Simple Support Matrices on E-Lab Navigator provide the optimal interoperability for your storage solution.

When performing many tasks related to CloudLink Agent on Linux machines, you use the SVM command. This command has several subcommands that are used to perform actions including registering, encrypting, reloading machines, and removing mount points.

Use this procedure to configure SNMP on CloudLink.

Various issues interacting with the PowerFlex Gateway, when the Gateway is configured for high-availability on hosts with SELinux in enforcing mode.

Dell PowerEdge server reboots in the middle of a hardware FW upgrade.

Unable to log in to the MDM using LDAP authentication.

The MDM service crashes when attempting to log in using LDAP authentication.

Cannot Create Thick Provisioned Volumes With CSI Driver.

Does PowerFlex Volume Create /Sys/Block/SciniX/Device?

This article explains how to troubleshoot the alert PFX00102.0000205 - The PowerFlex management platform nodes internal connectivity diagnostic failed.