PowerEdge RAID Controller H365i Front DC-MHS

This article shows how to add additional disks to a virtual disk or reconfigure a virtual disk.

VMware ESXi 9.0 VMkernel logs show warnings "Mode Sense cmd reported block size 0, does not match the current logical block size 4096" and "The device naa.<GUID> is marked format corrupt" when a Virtual Disk (VD) is created on PowerEdge RAID Controller (PERC) 12/13 with 512-byte emulation (512e) or 4-Kilobyte native (4Kn) drives; messages appear each boot but have no functional impact.

This article provides information about how to boot past the Driver Health Manager Screen.

Dell Technical solutions information about various topics, hosted on the Dell TechCenter IT community platform

When encryption is enabled on BOSS-N1, the system may stop during POST with the message: "No Boot Device Available or Operating System Detected."

Known issues and important information related to enablement inbox OS drivers on PERC12 family of controllers. (PERC H965, H365)

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

Information about how drives behind a PERC are NOT detected in Windows/VMware ESXi Installation if Firmware Device Order (FDO) is enabled.

The PowerEdge RAID Controller (PERC) driver continuously logs debug prints in the OS syslog file when large I/O operations are running on the system.

This article explains how to export the RAID controller log (TTY log) directly from RAID Controller (PERC).

This article provides instructions for the management and configuration of RAID arrays on a LSI MegaRAID 9361-8i, 9440, 9460, and 9341 RAID Controllers