Poweredge C4140

Learn how to create and export a SupportAssist Collection using iDRAC9 and iDRAC10 on Dell devices. Resolve technical issues with this step-by-step guide.

This article explains how to perform a driver or firmware update directly from the operating system (OS) using a Dell Update Packages (DUP).

Dell iDRAC9 and iDRAC10 remediations for a Command Injection security vulnerability that could be exploited by malicious users to compromise the affected system.

If the LifeCycle Controller (LCC) is enabled but it is missing in the menu during the POST, it is possible that you must import the iDRAC license to enable it again.

This article explains how to find supported memory configuration for your PowerEdge server.

There are special considerations for GPU firmware updates outlined in this article.

To replace a CMOS battery, remove the air shroud, disconnect and remove any expansion cards, locate the battery socket, and carefully pry out the CMOS battery. After installing a new CMOS battery, you must reinstall the expansion cards, install the air shroud, and restore the BIOS settings, ensuring the battery is operating properly and the correct data and time are set in the System Setup.

This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server. It is also relevant for 100% fan speeds.

This article describes how to find the iDRAC's current MAC address.

Most PowerEdge servers and other products that leverage a PowerEdge server hardware have an embedded Integrated Dell Remote Access Controller. This article helps to quickly identify the iDRAC version.

This article describes the "Easy Restore", which is a built-in storage component that maintains critical configuration information.

This article explains how to use the Import Server License feature to import an iDRAC license from the Lifecycle Controller UI.

Frequently Asked Questions (FAQ) about Physical Drives replacement in RAID Server and MD Arrays

This article provides information about how to delete a virtual disk using the Device Settings menu on a PowerEdge server. If your PowerEdge server is running the UEFI mode as a boot mode, the RAID BIOS is not displayed.

This article provides information about how to disable C-States and C1E on a PowerEdge Server.

The article describes updating Dell PowerEdge server firmware through Integrated Dell Remote Access Controller (iDRAC) 7, 8, 9, or 10. It details downloading the firmware image, logging in to the iDRAC web interface, uploading the image for installation, and managing pending updates.

This article provides information about how to create virtual disk in eHBA mode for PowerEdge RAID Controller 10.

This article provides information about identifying the hard driver properties in OMSA, system setup page, and iDRAC interface.

This article explains how to restore the BIOS defaults settings on a Dell PowerEdge Server. This procedure may be valid for other Dell products.

Explore various RAID levels - RAID 0, 1, 5, 6, and 10 - implemented in Dell PowerEdge servers. Learn about their configurations, benefits, and how they impact data redundancy and performance.

This article provides information about how to check Virtual Disk Properties in System Setup for PowerEdge Server.

Dell PowerEdge Server remediation is available for 2026.3 Intel Platform Update (IPU) components that could be exploited by malicious users to compromise the affected systems.

In some situations Dell Technical Support may request evidence to perform a more assertive diagnosis, this article illustrates how to attach files to your service request through the Dell support portal.

This article gives the solution of PowerEdge VMware vSphere ESXi 7.0 Host with a TPM attestation alarm seen after a BIOS update.

This page explains the difference between drivers and firmware and how to update them on Dell PowerEdge Servers using different methods.

Dell Enterprise SAS, SATA SSD: SMART predictive failures triggered by remaining write endurance falling below the threshold

Micron 5x00 Series SSDs may experience read/write performance degradation after reaching approximately 65,535 power-on hours (POH), which equates to roughly 7.5 years of operation. This issue affects performance only and does not result in data loss or drive failure.

This document highlights minimum, recommended, and latest code versions for Dell Technologies PowerEdge products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

The Integrated Dell Remote Access Controller 9 (iDRAC9) provides comprehensive, embedded management across the PowerEdge family of servers. IDRAC9 automation that lets your organization grow, and security that ensures peace of mind. It is a key technology in the OpenManage portfolio. Users can build a management solution that matches your needs, and by leveraging iDRAC, ensures optimal server management.

HWC8010 or HWC8011 UEFI errors in POST for iDRAC Hardware Configuration Validation typically occur due to firmware updates or the addition or removal of hardware components. Review system logs and investigate any recent changes before applying this solution.