VxRail Software

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This dial-home event is generated when the status of one of the SSD or hard drives within a VxRail node changes. This may indicate a failed or failing drive and may require replacement.

On VxRail ESXi nodes, the /vsantraces partition is a Ramdisk, rather than a physical or vSAN disk partition. In this article, we discuss this partition and some ways to fix the partition's high usage.

L7 proxy means layer 7 load balancer, it routes TCP traffic and makes load balancing by the content of the message. This article gives instructions of how to verify and change the L7 proxy setting of cilium-agent on VxRail manage 7.0.370 or above versions.

VxRail clusters do not support read-only account, the "View VxRail clusters" privilege does not provide any function.

Trying to add nodes using the VxRM plugin completes all the steps in the wizard including the Validation step. After clicking Finish, the plugin loads for some time and then fails due to incorrect entries in the resolv.conf file.

Failed to change virtual machine (VM) policy on virtual storage area network (vSAN) cluster.

Unable to power on a virtual machine (VM) after trying to export the virtual machine as an Open Virtualization Format (OVF).

The host management account on VxRail is disconnected.

VxRail deployment fails with message "VxRail Cluster Configuration Failed - Execution of the step Generate VMware vCenter Server certification times out."

LCM failed to process the request body due to LCM-related scripts are lost.

How to skip node addition validation when the existing nodes vmk0 and vmk2 MTU values are different.

The plug-in is not working after upgrading to VxRail 7.0.480 and later. Received a web.log error "HTTP 504 Gateway Time-out."

Instructions of how to replace the Virtual Storage Integrator (VSI) and PowerStore certificate then import to the VxRail manager and how to sign the VSI certificate with the user-preferred Certificate Authority.

Internet updates are returned with a message showing: "No Available System Updates."

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

A fatal error was detected on a component at bus <bus> device <device> function <func>.

This article explains the event code: VXR500TMP0121

The "Write" Endurance of solid state drive (SSD) arg1 is less than the threshold value of Remaining Write Rated Endurance.

The iDRAC is unable to successfully communicate with the device.

How to manually upgrade Application Delivery Controller (ADC) on VxRail manager.

This article details how to collect STIG logs during the STIG hardening process and from VxRail Manager.

vCenter showing "Warning: High pnic rx generic error rate detected on vmnicX" and "High pNic error rate detected, Check the host's vSAN performance view for details" warning messages.

vSphere Configuration Profiles are not supported on VxRail nor VCF on VxRail.

One or more VxRail Manager checks returns event code 1 or 2, representing yellow or red alerts, respectively. These must be investigated prior to upgrading the cluster.

How to disable remote connectivity

Power on a VM failed with "The device "hpet0" is not supported by the current hardware version" and Module 'DevicePowerOnEarly' power on failed.

ESXi shows disconnect within the NSX-T controller plane.

Frequent file server disconnections are reported on vCenter and users are unable to access file server during the time of the disconnections.

This article explains how to reset a lost root password without rebooting in VMware vCenter Server Appliance (VCSA) 6.7 U1, 7.x, and 8.x.