PowerMax

This article provides a list of security vulnerabilities that cannot be exploited on Dell EMC PowerMax Embedded NAS (eNAS) version 8.1.15.*, but which may be identified by security scanners.

How to verify PowerMax or VMAX single path devices using Unisphere for PowerMax?

TDEV's expansion in SRDF and SRDF/Metro active session using SYMCLI.

Dell Storage Simple Support Matrices on E-Lab Navigator provide the optimal interoperability for your storage solution.

How to perform storage performance analysis and sizing of ASP capacity and individual disks for an IBM i host system.

The Solutions Enabler symcfg list -demand and Unisphere displays show Metadata usage by percentage, but do not show the numbers that are used for the calculation. Dell users can connect to the array and gather this data.

As part of the Dell Future-Proof Program, Customers can make claims against DELL TECHNOLOGIES POWERSTORE/POWERMAX DATA REDUCTION GUARANTEE TERMS AND CONDITIONS. These claims are made by submitting a support service request. This article outlines validation steps, remediation requirements, and how to submit a claim. In addition, it explains Data Reduction Ratio (DRR) and specifics about the guarantee requirements.

The Dell VMAX and PowerMax enterprise storage platform families support storage-based Non-Disruptive Migrations (NDM) to migrate business-critical host systems to new storage arrays without application downtime. With the release of the PowerMaxOS 5978.444.444 code family, NDM support is added for the IBMi host platform. NOTE 1: For IBMi systems that also use Dell's native STM software toolkit (SRDF/TimeFinder Manager for IBMi), there are some additional considerations when the (optional) final step in the NDM process is done for a device-identity reset (unspoofing) of the migrated devices. Read the instructions provided below, prior to performing the identity reset! NOTE 2: The device identity reset, also mentioned as an "unspoof" operation, has implications for the next initial program load (IPL) phase after the unspoof. Read further details below.

Customer is receiving alerts from Unisphere suggesting specific FA directors have exceeded the %busy threshold.

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

Managed File Transfer (MFT) and ConnectEMC call home may not function if the Secure Connect Gateway (SCG) or Secure Remote Services (SRS) gateway is updated.

Authentication issues will occur if symauth is enabled and daemons are restarted, before user and group role mappings are defined.

Syscall 920d_26 triggers a memory leak causing flash_layer_log Driver to reach maximum number of entries (over 2100) causing environmental messaging to fail and the system to Vault. Fix 109359 is required.

ESXi 6.7 servers with Emulex fibre channel HBAs are not able to access LUNs on Dell EMC PowerMax storage after installing lpfc driver version 12.8.317.0.

RE port SRDF link is down and also showing NIC State: DOWN and NIC Link State: DOWN

After updating Emulex drivers to version 12.8.317.0, users report loss of connection to their arrays.

Host may be impacted with high read latency of up to 3 seconds and TASK1 timeouts if an EDS director is in DD state. Fix 107048 is required.

Secure Remove Services (SRS) version 3.52 disables Transport Layer Security (TLS) version 1.0 and 1.1. If the VMAX3, VMAX All Flash or PowerMax system does not have requisite enhancements, then the asset cannot register Managed File Transfer (MFT) properly.

Dell has a Customer Replaceable Unit (CRU) program for many of our hardware systems. The CRU program allows customers to replace designated hardware components. For a list of the hardware components that are designated as CRU for a specific hardware system, go to the Dell Warranty and Maintenance Page.

Mainframe SuperPAV (XPAV) Alias I/O is timing out on TASK22. Fix 106539 is required.

If during snapshot activities the internal free list becomes corrupted, all cache page allocations fail, resulting in an impact on the entire system. Fix 108596 is required.

VMAX or PowerMax upgrades from 5977 to 5978.221, then to 5978.479 may cause a FICON metadata mismatch that would keep new paths from logging in correctly. This could also be seen after a Power On Reset, and prevent the loading of new IBM MF channel code. Fix 106985 is required.

Fix 584167 improves the SymmWin AutoPSE_SFP script to report Dell part number for 10 Gig-E or 25 Gig-E SFP components.

In a Mainframe environment, during Online Fast IML, the FICON directors may become unresponsive when handling too many State Change Interrupts (SCI). Fix 106587 is required.

Fix 583233 reduces the severity of the error code 08.04DB.A4 to 5.

Dell Container Storage Modules (CSM) Container Storage Interface (CSI) Driver for PowerMax fails volume creation with errors finding storage group (SG) and volume.

Replication Data Pointers (RDP) LRU contention may cause memory failures. Fix 106475 is required.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Unable to see array alias/custom name in Unisphere for Powermax dashboard after new installation on newly built server, showing serial number instead.

SnapVX 'Relink' may fail with "The SNAPVX 'Relink' operation for Device List FAILED with: The operation resulted in a failed snapshot state." Fix 106352 is required. SnapVX may report a "Snapshot failed. Please check RDP and SRP usage." Fix 106890 is required.