문서
잘못된 입력입니다. 문자, 숫자 및 <>)(%/;,=#-/*을(를) 제외한 특수 문자만 사용하십시오.
30/257 표시
257/257 표시
이 문서에서는 Dell Technologies Enterprise 및 Data Center Infrastructure 제품의 최소, 권장 및 최신 코드 버전을 설명합니다. Dell은 코드 배포 데이터를 신중하게 평가하고 모니터링하여 제품 릴리스가 고객에게 신뢰할 수 있는 제품과 솔루션을 제공하기 위한 엄격한 기대치를 충족하는지 확인합니다.
업데이트됨: 7월 21, 2026
ID: 000205512
이 KB는 존 멤버를 교체하는 단계를 제공합니다.
업데이트됨: 5월 22, 2026
ID: 000288932
SANnav events 탭에서 텔레메트리 등록과 관련된 오류 메시지를 수신합니다.
업데이트됨: 7월 15, 2026
ID: 000190250
SAN 스위치에서 BNA를 사용하여 MAPS 정책을 가져올 수 없습니다.
업데이트됨: 5월 27, 2026
ID: 000052480
EM-1045, 섀시, 경고, 슬롯 XX의 전원이 꺼짐(전원이 충분하지 않음) 메시지에서 슬롯을 복구하는 방법은 무엇입니까?
업데이트됨: 5월 27, 2026
ID: 000022765
How to upgrade Rocky Linux v8.6 or above.
업데이트됨: 5월 23, 2026
ID: 000368537
SANnav 2.3.x 및 2.4.x에서 DR(Disaster Recovery)을 위해 열어야 하는 포트는 무엇입니까?
업데이트됨: 5월 23, 2026
ID: 000368512
Connectrix SANnav: Error "IP Address is not reachable" while setting up disaster recovery on the Primary node.
업데이트됨: 5월 23, 2026
ID: 000348611
How to add an NTP server after SANnav installation. Add the NTP servers to the chrony.conf file. Once added, restart chronyd and confirm synchronization using the "chronyc sources" command.
업데이트됨: 5월 23, 2026
ID: 000348524
Proxy service does not start after replacing the SSL certificate with CA signed.
업데이트됨: 5월 23, 2026
ID: 000340227
The switch user does not have privilege to access all possible VFs.
업데이트됨: 5월 23, 2026
ID: 000328225
SANnav에서 vCenter 호스트 검색이 실패하고 "Conflict-Existing Host" 오류가 표시됨
업데이트됨: 5월 22, 2026
ID: 000254427
Unable to send CallHome from SANnav or Brocade switch after Secure Connect Gateway (SCG) upgrade to 5.26.00.18.
업데이트됨: 5월 22, 2026
ID: 000245541
SANnav Management portal GUI access issues after fresh installation.
This web browser is too old to run the Web Console (missing selector(:is(): where())
A modern browser is required for security, reliability, and performance.
업데이트됨: 5월 21, 2026
ID: 000242166
섀시 이름을 맞춤 구성하는 절차입니다.
업데이트됨: 5월 20, 2026
ID: 000224253
SANnav에서 자체 서명된 kafka 인증서를 갱신한 후에도 스위치 상태가 Marginal입니다.
업데이트됨: 5월 20, 2026
ID: 000223016
이 문서에서는 SANnav 기술 지원 정보를 수집하는 방법에 대해 설명합니다.
업데이트됨: 5월 19, 2026
ID: 000020604
After upgrading to Fabric OS (FOS) 9.1.1c, unable to run inline commands from UNIX or Linux server to the switch with the "fosexec" commands.
업데이트됨: 5월 19, 2026
ID: 000218645
Users are unable to log in due to full file systems on SANnav versions 2.2.1, 2.2.2, 2.2.2.1, and 2.2.2a.
업데이트됨: 5월 19, 2026
ID: 000217906
A slow blinking amber light showing internally from the switch model DS6620B-V2, not from the switch panel, is confirmed by Brocade to be the LED from the eUSB card (on the motherboard).
업데이트됨: 5월 19, 2026
ID: 000217788
From the switch supportsave & SANnav data, it was figured out that the SNMP traps are not received from the switch to SANnav
업데이트됨: 5월 18, 2026
ID: 000217340
SSH 키 기반 인증에 PuTTY를 사용하는 방법
업데이트됨: 5월 18, 2026
ID: 000217157
이 KB는 존 개체의 이름을 변경하는 단계를 제공합니다. cfgs, zones, aliases를 포함한 모든 zone 객체 유형에 대해 다음 단계를 사용할 수 있습니다.
업데이트됨: 5월 18, 2026
ID: 000217021
The seccermgmt cert shows error "Is an unknown x509 format."
업데이트됨: 5월 18, 2026
ID: 000216601
Connectrix B-Series FOS compatibility check with SMI-S Agents
업데이트됨: 5월 18, 2026
ID: 000215554
How to retrieve or access MiB files using SANnav.
업데이트됨: 5월 18, 2026
ID: 000215480
사용자가 제공한 파일 이름이 아닌 스위치 이름 접미사로 자동으로 생성되는 Configupload 출력입니다.
업데이트됨: 5월 18, 2026
ID: 000215479
활성 포트가 현재 POD 라이선스 풀을 소진한 경우 추가 포트에 라이선스가 할당되지 않습니다. 이러한 경우 POD 할당을 새로 사용한 포트로 해제하여 사용되지 않은 포트에서 라이선스를 수동으로 이동하고 예약합니다.
FOS 9.x 이상
업데이트됨: 5월 18, 2026
ID: 000214831
이 문제는 SSL 인증서가 SANnav에 적용되었지만 SSL 인증서가 설치되어 있어도 브라우저에 안전하지 않은 연결이 표시될 때 나타납니다.
업데이트됨: 5월 18, 2026
ID: 000214362
This issue is seen while the backed-up switch configuration has been loaded to the switch using the configdownload command.
업데이트됨: 5월 18, 2026
ID: 000214361