PowerEdge R240

이 문서에서는 iDRAC 인증서를 생성하고 가져오는 방법에 대해 설명합니다.

이 문서에서는 PowerEdge 서버의 섀시 침입, 섀시 열기 메시지 문제를 해결하는 단계를 제공합니다.

This document answers questions about SupportAssist Enterprise.

이 문서에서는 UEFI 또는 HII(Human Interface Infrastructure)에서 Emulex LPe31002 HBA 링크 속도를 구성하는 방법에 대한 정보를 제공합니다.

Installation of January 10, 2023 patch KB5022291 on Windows Server 2022 may result in Blue Screen error on the following systems and configurations. Dell 14G PowerEdge Server with Intel Optane persistent memory Series 100 configured in App Direct mode is affected. Dell 15G PowerEdge Server with Intel Optane persistent memory Series 200 configured in App Direct mode is affected. Note: Memory Settings configured in Memory Mode in the BIOS function correctly with KB5022291 or higher version of Windows Server 2022 updates. Optane Series 100 Memory Mode is Persistent Memory set to Off. Optane Series 200 Memory Mode has Optane DIMMs disabled under Memory Mapout.

이 문서에서는 SSD PPID(Piece Part Identification)를 확인하는 세 가지 방법을 제공합니다

SUP0517 오류로 인해 백플레인 펌웨어 업데이트 작업이 실패합니다.

이 문서에서는 Dell Technologies PowerEdge 제품의 최소, 권장 및 최신 코드 버전을 설명합니다. 코드 배포 데이터를 신중하게 평가하고 모니터링하여 제품 릴리스가 고객에게 신뢰할 수 있는 제품과 솔루션을 제공하기 위한 엄격한 기대치를 충족하는지 확인합니다.

아래 문서는 iDRAC의 일부 버전에 대한 중요한 로그 항목 "하드웨어 오류 상태로 인해 전면 LED 패널에 액세스할 수 없는 SWC5008"에서 PowerEdge 시스템을 복구하는 해결 방법입니다.

NVIDIA has updated the signing certificate for its UEFI network driver from Microsoft UEFI CA 2011 to Microsoft UEFI CA 2023. PowerEdge 17G platforms already trust the CA 2023 certificate, but 15G/16G and earlier servers require a BIOS update released in December 2025. Systems without this updated certificate support may fail to initialize the NIC UEFI driver when Secure Boot is enabled.

Server BIOS Update Guidelines for Microsoft Secure Boot Certificates are provided in this article.

PowerEdge 14G, 15G, 16G, and 17G servers skip Preboot eXecution Environment (PXE) boot when an "Unavailable" entry is last in the boot order.

FAN0000/FAN0001 오류(경고 미만의 RPM 또는 위험)를 보고하는 팬은 제거한 후 다른 커넥터로 교체해야 합니다. 팬에서 오류가 발생하면 팬을 교체합니다.

Dell PowerEdge Toshiba MG08 and MG09 hard drives may encounter uninterruptible Background Media Scanning (BMS), causing I/O errors, or timeouts.

Encountering PR8 errors in the LifeCycle (LC) log when using a BlueField-3 (BF3) Data Processing Units (DPU) card (DPN: HFWRM).

This article provides information about the LIC008 error seen when importing the IDRAC License.

This article provides information about how to verify if a Network Interface Card (NIC) is compatible with a PowerEdge Server.

This article provides information about CPU Machine Check errors and common causes and proper handling when errors are seen.

Unsure about the procedure to update a specific component's firmware in a PowerEdge system? Learn how to in this specific article.

New deployments of OpenManage Enterprise 4.4.0 are experiencing service failures after configuring the time zone for GMT +02:00 Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius. The issue is only seen on fresh deployment of OpenManage Enterprise (OME) 4.4.0 on Hyper-V. Deploying OpenManage Enterprise (OME) on other hypervisors is not impacted.

R7725, R6725, R7715 및 R6715의 CPU 코어 수가 올바르게 인식되지 않습니다.

PowerEdge: 2.5" 15k RPM SAS 하드 드라이브의 산업 종료 생산에 대한 Dell 서비스 지원

Dell Technologies advises against downgrading Hard Drive or SSD firmware, except in validated scenarios, due to unpredictable results and version reporting issues.

시스템을 재시작한 후 iDRAC(Integrated Dell Remote Access Controller)에 가상 디스크 정보가 간헐적으로 표시되지 않을 수 있습니다.

이벤트 후 PowerEdge 15G 서버가 응답하지 않거나 응답을 중지PST0210.

Leveraging the 'Reboot Required' filter and selecting all items in this filtered view results in the 'make compliant' job applying all non-compliant firmware components. An unexpected reboot of the target is seen as components that do require a restart are deployed to the target. The issue is only seen if selecting all objects and using the 'Reboot Required' filter. All other filters work as designed.

PowerEdge servers crash with PCIe fatal errors while updating Kioxia CM6 NVMe drive firmware.

CPUs can be perceived to be hot while server is idle.

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

ESXi 8.0 U3 설치 중에 시스템 응답 중지 또는 PSOD(Purple Screen Of Death)가 표시됨