메인 콘텐츠로 이동
전체 액세스 권한을 얻으십시오.
로그인
계정 만들기
전체 액세스 권한을 얻으십시오.
로그인
계정 만들기
Unisphere for PowerMax image

Unisphere for PowerMax

연결:  키 생성
Unisphere for PowerMax

문서

잘못된 입력입니다. 문자, 숫자 및 <>)(%/;,=#-/*을(를) 제외한 특수 문자만 사용하십시오.

30/257 표시
257/257 표시

Dell은 대부분의 하드웨어 시스템에 대해 CRU(Customer Replaceable Unit) 프로그램을 운영하고 있습니다. CRU 프로그램을 통해 고객은 지정된 하드웨어 구성 요소를 교체할 수 있습니다. 특정 하드웨어 시스템에 대해 CRU로 지정된 하드웨어 구성 요소 목록은 Dell 보증 및 유지 보수 페이지를 참조하십시오.
업데이트됨:  6월 23, 2026 ID: 000187496

Unisphere 및 Solutions Enabler 9.x 소프트웨어에서 V4 어레이 모델을 관리할 수 없습니다. 9.x 버전의 소프트웨어에서는 PowerMax 모델 2500 및 모델 8500 어레이를 감지할 수 없습니다.
업데이트됨:  5월 19, 2026 ID: 000218791

Dell PowerMaxOS, Dell PowerMax EEM, Dell Unisphere for PowerMax, Dell Unisphere for PowerMax Virtual Appliance, Dell Solutions Enabler and Dell Solutions Enabler Virtual Appliance remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.
업데이트됨:  7월 29, 2026 ID: 000483543

This article provides a list of security vulnerabilities that cannot be exploited on Dell Unisphere for PowerMax 9.x and 10.x but which may be flagged by security scanners.
업데이트됨:  7월 29, 2026 ID: 000475524

Unisphere For PowerMax: SNMP(Simple Network Management Protocol) 알림을 구성하는 방법
업데이트됨:  7월 27, 2026 ID: 000229355

자세한 Solutions Enabler 및 Unisphere for PowerMax 업그레이드 절차.
업데이트됨:  7월 15, 2026 ID: 000021788

Unisphere for PowerMax 상태 점검이 실패하고 "현재 구성 서버 요청을 처리할 수 없습니다" 오류가 표시됩니다.
업데이트됨:  7월 07, 2026 ID: 000418319

업그레이드 후 성능 데이터가 누락되었습니다.
업데이트됨:  6월 26, 2026 ID: 000228795

Unisphere for PowerMax: 5978.711.711에서 5978.714.714로 업그레이드한 후 SNMP 구성이 손실되었습니다.
업데이트됨:  6월 26, 2026 ID: 000228793

Unisphere for PowerMax를 사용하면 성능 데이터를 내보내 UPV(Unisphere Performance Viewer)에서 오프라인으로 볼 수 있습니다. 결과 파일은 Performance Viewer를 실행하는 VM(Virtual Machine)에서 가져올 수 있지만 먼저 Unisphere for PowerMax 호스트에서 내보내야 합니다.
업데이트됨:  6월 22, 2026 ID: 000007990

Unisphere for PowerMax 알림 설명 =Symmetrix 000123456789: 서비스 프로세서가 다운되었거나 어레이와 통신하지 않습니다. 또는 symevent alert "Symmetrix Service Processor 또는 MMCS가 Symmetrix와 통신하지 않습니다."
업데이트됨:  6월 20, 2026 ID: 000203646

이 문서에서는 사용자가 알림 기능이 있는 모든 제품에 게시된 문서의 알림을 받는 절차에 대해 설명합니다.
업데이트됨:  6월 10, 2026 ID: 000183044

이 문서에서는 Dell Storage 및 Data Protection 하드웨어 제품에 대한 서비스 요청 또는 지원 케이스를 여는 데 필요한 일련 번호, 제품 ID 또는 PSNT(Product Serial Number Tag)를 찾는 방법에 대해 설명합니다.
업데이트됨:  6월 05, 2026 ID: 000021638

Unisphere for PowerMax에 로그인할 수 없고 "Error Logging In" 오류 메시지가 표시됩니다.
업데이트됨:  6월 05, 2026 ID: 000190456

이 문서에서는 Unisphere for PowerMax 원격 Syslog를 구성하는 방법에 대해 설명합니다.
업데이트됨:  6월 02, 2026 ID: 000206117

유효 사용 용량은 활용도를 측정하는 가장 좋은 척도입니다.
업데이트됨:  5월 29, 2026 ID: 000190104

Unisphere for PowerMax에서 알림에 대해 보안 SMTP 이메일 서버를 구성하는 방법
업데이트됨:  5월 29, 2026 ID: 000380011

An alert was triggered for the storage group test_snap in Unisphere for PowerMax due to noncompliance with its snapshot policy test_hourly_snapshot. sThe policy require x snapshots, but the current snapshot count is 0, resulting in a compliance gap. The error code is show as "N/A."
업데이트됨:  5월 24, 2026 ID: 000417048

SK Hynix PE8010 및 PE8030 NVMe M.2 드라이브에서 PDR3 이벤트 코드와 실패 상태를 보고하는 것이 관찰되었습니다.
업데이트됨:  5월 21, 2026 ID: 000225181

Unisphere for PowerMAX: Ping Remote IP in RE IP Interfaces returns "One or more IP addresses passed do not exist in the director emulation".
업데이트됨:  5월 19, 2026 ID: 000221576

Recommendations for carrying out Proactive Healthchecks on PowerMax Array
업데이트됨:  5월 19, 2026 ID: 000219791

PowerPath가 설치되어 있고(FX 어레이를 통해 라이선스가 부여됨) VMAX에 구성된 디바이스가 있는 호스트가 Unisphere에 표시되지 않습니다(PowerPath 호스트 아래의 PMAX UnisSphere GUI에 나열되지 않음)." powermt update host_registration" 또는 호스트 재부팅은 도움이 되지 않습니다.
업데이트됨:  5월 18, 2026 ID: 000214558

Unisphere for PowerMax upgrade fails from version 9.2.x to 10.0.x
업데이트됨:  5월 17, 2026 ID: 000213144

How to set SRDF or Metro preference for Witness protected groups.
업데이트됨:  5월 16, 2026 ID: 000209777

Linux SUSE 15 SP3 독립 실행형 서버에서 Unisphere for PowerMax v10의 새로 설치가 작동하지 않습니다.
업데이트됨:  5월 15, 2026 ID: 000204011

스토리지 시스템을 등록할 수 없고 "PowerMax/VMAS 어레이가 표시되지 않습니다"라는 메시지가 표시되고 스토리지 시스템을 등록하는 동안 "400 Failed to discover VMAX system, invalid connection. 상태 코드: 400, 잘못된 요청입니다."
업데이트됨:  5월 15, 2026 ID: 000203472

In Unisphere, when trying to create a Compliance Alert Policy the needed storage groups are not listed.
업데이트됨:  5월 15, 2026 ID: 000202924

SMAS 데이터베이스가 중지되고 시작되지 않으므로 Unisphere for PowerMax 업그레이드가 실패합니다.
업데이트됨:  5월 15, 2026 ID: 000202808

VDM cannot load after a DataMover (DM) panic due to blocked threads, issue is when eNAS is running Version 8.1.15.401 and NFSv4 mounted filesystem.
업데이트됨:  5월 15, 2026 ID: 000202531